Strong Force Electric Fans /Industrial  

strong force eletric fan is appliable for the sun-stroke prevention,cooling purposes in the occasions such as factory workshop,warehouse,basement,cantee,etc.the service enviromental temperature of the fan does not exceed 40 degree.it can be used in the non-corrosive gas with no particle dust.

strong force electric fan is mainly composed of motor,swing mechanism,fly,screen cover,wall  type support frame.the fly has been formed by aluminum.

die-casting with static balancing correction,smooth running and high efficiency .

 Y9-38 Boiler induction draft fan/ centrifugal ventilator

This kind of ventilations are suitable for industrial boiler which has been matched with economizer and dust-exhausting set.The boiler evaporation amount should be 0.5-35t/h.The ambient temperature should be less than 250 deg C.You must install a exhausting set with efficiency more than 85% before using the fans,so that the dust in smoke going into the fans will be reduced.By doing this,it can not only reduce the pollution to the environment,but also enable the fans to be durable.

2JZ series double-stage high pressure blower/ air blower

2JZ series double-stage - high pressure centrifugal blower is a new product that appears after we researched and developed based on a series of high pressure blower both at home and abroad.It is with high pressure and low noise.The structure of the impeller is double-stage.It's also attractive because of reasonable and compact design,beautiful appearance and steady operation.

This kind of blowers are widely used in industries  where ventilation is needed such as the Smithery Industry,Glass Industry,Electroplating Industry,Ceramics Industry,etc  .They are also used in Granary,Feed Industry,mining Industry and so on to convey the materials.The medium should be air and other unnatural but harmless to human beings,non-corrosive gas.No adhesive matters are allowded.The dust in the air should be no more than 150mg/m3 and ambient temperature should be no more than 80 deg C.

power(W)	pressure(Pa)	air volume(m3/h)	material	voltage(V)	rotation(r/min)	frequency(Hz)
900	5100-4650	200-300	Aluminium alloy	220/380	2800	50
2200	6420-5300	400-670	Aluminium alloy	220/380	2800	50
4000	8100-2550	400-1300	Aluminium alloy	220/380	2900	50
7500	7650-3430	1150-1600	Aluminium alloy	220/380	2900	50
11000	11920-9520	1030-1700	Aluminium alloy	220/380	2930	50
18400	10400-3500	2070-2920	Aluminium alloy	220/380	2930	50
50	420	150	Aluminium alloy	220/380	2800	50

C6-48 Dust-Exhausting Centrifugal fan

C6-48 Dust-exhausting Centrifugal Fan specially made to exhaust dust.This series of fans are not easy to get dusty and they are durable.It is suitable to convey the gas including dust,wood flour,small fiber,etc.If there is hard granulated matters in the air,the fans should be matched with dust-exhausting set.It can also be used for common ventilation system.

CZR series  low noise Centrifugal  AC blower/air blower

CZR series of centrifugal blowers that are driven by single-phase capacitance driving motor;CZT series are driven by three-phase AC asynchronous motor .They can produce large air volume with high Wind Pressure.Saving energy,temperature shortly-increased,beautiful appearance and so on are their features.

These blowers are widely used in households,canteens,small-scale boiler,ironmaking industry where they need equipment to help combusting and blowing film.They can also be used to supply and cool down air.

4-72-12 movable air blower for grain depot/ ventilation fan

4-72-12 Movable air blower is designed specially for grain depot to lower temperature.The main part of the blower is 4-72 ventilator with high efficiency and low noise.The secondary part is a handcart.So the fans are movable.There are totally 10 specifications from No.2.8 to No.12.The driven type is C type.We can specially made according to clients' requirements.

G4-73 Boiler Centrifugal Fanner and induced draft fan

G4-73 and Y4-73 Boiler centrifugal and induced fans are suitable for the ventilation and induced draft system of thermal power plants where the evaporation amount should be 2-670 t/h.G4-73 can be used for mining industry to ventilate.It can also be used to common ventilation.The medium should be air ,and its temperature should not surpass 80 degC.Induced draft fans exhaust smoke,and its temperature should be less than 250 deg C.

ZDG fire fighting and ventilation Dual-purpose Cabinet Centrifugal Fan/ ventilation fan

ZDG series of low noise cabinet centrifugal ventilators are new products we develp based on advanced technology home and abroad.It have two functions: exhaust in fire fighting ,and air exchange.It has features such as high efficiency,low noise,convenience for installation,steady operation,large air volume,high-temperature resistance,etc.It is new product for residential building to remove smoke when fire fighting.It's also attactive becasue of compact structure and beautiful appearance. The framework is made of sectional material .The box board is made of cold rolled steel sheet adopting double-decked structure.There are fireproofing and warm-keeping materials inside the ventilation so as to avoid condensation in high-temperature place.It is more efficient in lowing noise and reducing vibration.

FZY axial-flow with External Rotor Motor / axile fan

The series of ventilators are made up of asynchronous motor operated by rotor single-phase capacitance or three-phase asynchronous motor,double-flange cylinderical body,net rack,and blades.Its features are large air volume,less vibration,low noise,steady operation ,etc.

This kind of fans is used in  the place where large ventilation is needed.It can also be used in buildings,factories etc to exchange and clear air.

SWF-I flow-mixed ventilator/mixed flow fans

SWF-I flow-mixed ventilator is a novel fan which is not belong to Axial-flow ventilator or Centrifugal fan but have both of their features.When the size is same,its pressure is higher than axial-flow ventilator's,and its air volume is larger than centrifugal fan's.It's featured as its wide effiecient-operation area,high efficiency,etc.This kind of fans are widely used in office buildings,hotels and other large-scaled residential buildings to match their ventilation system.It is also used in cold storage,textile industry,etc to exchange air,so as to replace low pressure centrifugal ventilators and high pressure axial-flow fans,as they have to be matched with noise elimination measurements.

-nbsp;

-nbsp;

-nbsp;

SJG obique-flow Pipeline Fan / Pipe ventilator

SJG series of axial-flow pipeline fan are derived from SWF series.Its impeller are chaged from that of axial-flow fan,and it adapts drum-type ventilation canister so that the direction of the air flow is oblique. The features of the fans are as below:

When the sizes are the same,its air flow volume is larger than that of centrifugal fans.Its pressure is higher than that of axial-flow fan.

The fans' volume is smaller than that of centrifugal fans.It has advantages like wide efficient-operation area,low noise,occupying less area,convenience for installation,etc.This kind of fans don't influence the arrangement and trend of pipeline.It is most suitable to increase pressure and ventilate in pipe.In a narrow space,you will find its compact structure is very attactive.

SJG series are widely used in minding industry,restaurants,hotels,museums,gymnasium,high buildings to exchange air.

-nbsp;

-nbsp;

-nbsp;

KT40 Axile fan / axial-flow ventilators

T40 Axial-flow Ventilator is suitable for factories,warehouses,offices,residential houses to exchange air or enhance heat dissipation.If the body is removed,the fans can be freely used.It can also be intervally installed in a long pipeline so as to increase the pressure in the pipe.

As clients requested,the structure of the KT40  fans is designed to place the motor on the fan body and are driven by belt.The performance of KT40 is the same as T40's.Clients can change their rotation to meet the performance they need.The most attractive function is that it can exhaust high-temperature air and moisture-proof air.

T35-11 Axial-Flow Ventilator / Axile draft fan

T35-11,BT35,FT35 Axial-Flow Ventilators are products to replace 30K4 products.Based on analysis and comparation with the similar products abroad,through optimized design,the structure of the impeller is confirmed.The motor is improved and the loss of air flow is reduced.Therefore,the efficiency of the fans is 89.5% higher when the noise is 3.6dB lower than Noise A standard.We strengthen the welding of blades and impeller so that the blades can avoid breaking.

This series of fans are suitable to convey non-inflammable,non-explosive,non-corrosive gas in which no obvious dust can be found.The temperature shouldn't surpass 60 deg C.The fans are widely used in factories,warehouses,offices,residential houses to ventilate or enhance heat dissipation.They can be intervally installed in a long pipeline to increase the pressure in the pipe.

BT35-11 is an Explosion-proof Axial-Flow Ventilators and it can be used to exchange the inflammable and explosive gas.FT35-11 is a Corrosion-proof Axial-Flow ventilator which is used to convey the corrosive gas.Its performance and parameters is the same as T35-11's.

SF Axial Flow Ventilation/ Axile draft fan

SF Low Noise Axile Ventilators have the advantages such as smooth streamline form surface,steady operation,high efficiency,low noise,saving energy,etc.SF series of ventilators can be devided into 4 types  according to the using requirement,they are pipelined type,fixed one,wall one and post one.If devided according to the diameters of impeller,there will be 12 specifications.

This kind of fans are widely used in mining industry and residential building to exhaust in wall type,blast in post type and ventilate in pipelined type.It is also used in Chemical , light industrial,food,medical,electrical,transporting places and warehouse to match the HVAC.

-nbsp;

-nbsp;

-nbsp;

BZF explosion-proof Axial Flow fan

BZF series of against explosion axile draft fans are used in the dangerous places : Area1 and Area2,where there are explosive air mixture at or below the level II kind B Stage,T4 Group.It is used for the plants and warehouse to ventilate ,exchange air or enhance heat dissipation.

It should be operated in the following conditions:AC 50Hz,Voltage 220V or 380V. The place where there is no heavy corrosion gas and no obvious dust.

We can add installation holders if clients request.

The fans conform with the standard mark Exd II BT4.

It is made up of explosion-proof motor,blades,ventilation canister,etc.The blades are made of aluminum and the ventilation canister is made of steel sheet welded with sectional material.The power line can be steel conduit or cabling.There is an earthing screw outside the fan

BYZ double ventilation high temperature resistant and damp proof axial fan / axiel draft fan

Model BYZ is a new generation of Low Noise Axial Fan.It adapts optimized aerodynamics design and advanced processing technology.The structure is reasonable and firm,which ensures the fan to be safe and practical.It has many features such as large air volume,high wind pressure,low noise,less power consumption,lightness,etc.It is bidirectionally ventilating without any difference in air volume.You can adjust the angle of the blades if needed.

There can be 11 specifications according to the different diameters of the impeller.Each fan can have 8 to 14 pieces of blades and six angles from 15 deg to 40 deg are available.The largest air volume can reach 70000 m3/hr.

The motor of BYZ axial fan is high temperature resistant,so the fan can be operated in the place where the ambient temperature is less than 150 deg C. The impeller made of an alloy of magnesium and aluminum have explosion-proof function.Therefore if it is matched with explosion-proof motor,the fan can be used to convey the gas that are easy to catch fire.BYZ axial fan is the best choice for drying kilns to ventilate and heat exchange.

Electric Blower (Aluminum Body) ,in which there is capacitance starter,has features such as large air volume,high wind pressure,saving energy,lightness and beautiful appearance.It can help combusting and is applicable to families,restaurants,small-scaled boiler,blast furnaces,etc.It is also used in common places to lower temperature.

-nbsp;	-nbsp;	-nbsp;	-nbsp;	-nbsp;	-nbsp;	-nbsp;	-nbsp;	-nbsp;	-nbsp;	-nbsp;	-nbsp;
离心风机系列参数
型号规格	电压	频率	相数	输入功率	电流	转速	风量	噪音	静压	电容	重量
Type	V	Hz		W	A	r/min	m3/min	dB(A)	Pa	F/V	kg
85FLJ1	110	50	1	22	0.18	2300	0.6	<50	50		0.7
85FLJ2	220	50	1	22	0.09	2200	0.6	<50	50		0.7
130FLJ1	220	50	1	85	0.4	2200	3.6	-le;70	280	2.2/400	2.2
130FLJ2	110	50	1	85	0.8	2200	3.6	-le;70	280	4/400	2.2
130FLJ3	380	50	3	80	0.21	2200	3.6	-le;70	280		2.2
130FLJ5	220	50	1	120	0.55	2600	5.5	-le;72	350	2.7/400	2.5
130FLJ7	380	50	3	145	0.35	2600	5.6	-le;72	350		2.5
150FLJ3	220	50	1	180	0.8	2800	6.5	-le;70	400	4/400	6.2
150FLJ4	220	50	1	100	0.46	1400	3.5	-le;65	150	4/400	6.2
150FLJ5	380	50	3	300	0.8	2800	10	-le;76	450		6.2
150FLJ6	380	50	3	180	0.48	1400	6.5	-le;65	400		6.2
150FLJ7	220	50	1	300	1.6	2800	10	-le;76	450	5/400	6.2
150FLJ8	380	50	3	300	1.6	2800	10	-le;76	450		6.2
150FLJ17	220	50	1	220	1.05	2600	9	-le;72	420	5/400
-nbsp;	-nbsp;	-nbsp;	-nbsp;	-nbsp;	-nbsp;	-nbsp;	-nbsp;	-nbsp;	-nbsp;	-nbsp;	-nbsp;

The series of ventilators are made up of asynchronous motor operated by rotor single-phase capacitance or three-phase asynchronous motor,double-flange cylinderical body,net rack,and blades.Its features are large air volume,less vibration,low noise,steady operation-nbsp;,etc.

This kind-nbsp;of fans-nbsp;is used in -nbsp;the place where large ventilation is needed.It can also be used in buildings,factories etc to exchange and clear air.

NO.	blade NO.(piece)	voltage(V)	frequency(Hz)	power(W)	rotation(r/min)	air volume(m3/h)	dB(A)
FZY-2E200	6	220	50	75	2400	1050	65
FZY-2D200	6	380	50	75	2400	1050	65
FZY-4E200	6	220	50	55	1450	510	53
FZY-4D200	6	380	50	55	1450	510	53
FZY-2E250	6	220	50	185	2300	2100	69
FZY-2D250	6	380	50	185	2300	2100	69
FZY-4E250	6	220	50	70	1450	1300	55
FZY-4D250	6	380	50	70	1450	1300	55
FZY-2E300	6	220	50	230	2300	3000	69
FZY-2D300	6	380	50	230	2300	3000	69
FZY-4E300	6	220	50	95	1450	2200	61
FZY-4E300	6	380	50	95	1450	2200	61
FZY-4E350	6	220	50	130	1450	3500	65
FZY-4D350	6	380	50	130	1450	3500	65
FZY-4E400	6	220	50	185	1450	5300	68
FZY-4D400	6	380	50	185	1450	5300	68
FZY-4E450	6	220	50	250	1450	6150	73
FZY-4D450	6	380	50	250	1450	6150	73
FZY-4E500	6	220	50	380	1450	8500	74
FZY-4D500	6	380	50	380	1450	8500	74
FZY-4E600	6	220	50	850	1450	14800	83
FZY-4D600	6	380	50	850	1450	14800	83

-nbsp;

JS Axial-Flow Fan is a square-shaped axial fan which produces less noise in simple structure.It's features are large coefficient of air volume,compact structure,convenience for installation and moving,etc.The fan is made up of blades,housing,motor,driving set,etc.It is driven through belt in type C.The medium should be non-corrosive and non-explosive gas.The ambient temperature should be among -10 deg C and 60 deg C.The dust and hard granulated matters should be less than 150 mg/m3.

This kind of fans are widely used in place ,such as mining industry,warehouses,offices,residents,etc where ventilation is needed.

blade rotation（r/min）	motor rotation（r/min)	air volume(m3/h)	noise dB(A)	power(kw)	voltage(V)	dimension
						L.	W.	H.
520	1400	21000	70	0.37	380	800	800	370
520	1400	28000	70	0.55	380	1000	1000	370
480	1400	31000	70	0.75	380	1100	1100	370
420	1400	42000	70	1.1	380	1380	1380	370
420	1400	42000	70	1.1	380	1380	1380	370
400	1400	50000	70	1.5	380	1530	1530	370
400	1400	50000	70	1.5	380	1530	1530	370
360	1400	63000	70	1.5	380	1750	1750	370

-nbsp;

BPS Explosion-proof Exhaust Fan/ anti-explosion exhausting fan

BPS 51 Explosion-proof Exhaust Fans are used in the dangerous places : Area1 and Area2,where there are explosive air mixture at or below the level II kind B Stage,T4 Group.In the line of Voltage 220V or 380V,50Hz,they are used for ventilation and cooling purpose.

The exhaust fans can be well operated in the following condition:

The place is at an altitude of less than 2000m.

The ambient temperature is:-20 deg C to 40 deg C

When 25 deg C,the ambient humidity is no more than 95%..

Axial-Flow Exhaust Fan/axile fan

FA series of Axial-Flow Exhaust Fans are driven by single-phase capacitance operated motor.FTA series are driven by three-phase asynchronous motor.Their reasonable structure,beautiful appearance,and firmness has attracted many customers.They are also durable and can save energy.

This kind of fans are suitable for factories,warehouses,offices,kitchens of canteens,basements,etc to exhaust and ventilate.They are for sunstroke prevention and cooling use.You can match it with shutters.

CZR series  Centrifugal  AC blower/air blower

CZR series of centrifugal blowers that are driven by single-phase capacitance driving motor;CZT series are driven by three-phase AC asynchronous motor .They can produce large air volume with high Wind Pressure.Saving energy,temperature shortly-increased,beautiful appearance and so on are their features.

These blowers are widely used in households,canteens,small-scale boiler,ironmaking industry where they need equipment to help combusting and blowing film.They can also be used to supply and cool down air.

Name:Gz series drying fan / air blower

Gz series are made of aluminum alloy material.It is light.When be operated,it produces less noise and large air volume.

This kind of fans are used to support the machinery and equipment.Its adjustable inlet well meets the demand of pressurizing and ventilation.

HBJS  Aluminum Alloy centrifugal fan/ventilation fan

HBJS series are the fans specially designed for carton machine to deliver paper and clean dust.The semi-open impeller is cast from 10 forwards curved blades and a hub.It is featured by high pressure,steady pressure curves.It is not easy to be dusty and operated without producing spark.

This kind of fans are also suitable for dust-exhausting system to convey the impurities such as fiber,cashmere,etc and to convey the air of that includes wood flour ,dust,etc.The ambient temperature should be less than 80deg C

new development front curved multi-wings air blower,shanjinfeng.A type specification from 2.5to 6.3#altogether 9 kinds,amount-nbsp;of wind May reach 23000m3/h,the entire pressure reaches as high as 1100/Pa,has the static pressure to-nbsp;be high,the amount of wind major characteristic.

the air blower strcuture is advanced,can realize -nbsp;0-nbsp;,90,180,270four kind of angles exchanges.this series air bloweris suitable-nbsp;for the factory and minigenterprise,the size guesthouse,the cafeteria and its the publicplace,the kithen platoon wind or the oil pumping

smoke using of.

-nbsp;

-nbsp;

-nbsp;

-nbsp;

Y series motor is fully enclosed self-fan cooled cage type three-phase asynchronous motor,is atate-of-the-art basic series,and meets related stipulations of IEC standard .this-nbsp;series of motor features high efficiency,energy saving,large starting torque,low noise,small-nbsp;vibration,high reliability,convenient operation and maintenance etc.it may be used extensively in general conditions withous inflammable,explosive or corrosive gases and on mechanical equipment with special requirement,e.g.metal cutting machine,pump,blower fan,transport machinery,agitator,agricutural machinery and-nbsp;machinery for food industry etc.-nbsp;-nbsp;

YS series three-phase asynchronous motor meets related stipulation of IEC standard.it is used extensively-nbsp; for various small sized machinery,medical apparatus,household appliances,blower as well as machinery,apparatus and instrumentation in chemical,textile and agricultural machinery etc depatments,features good starting and running performance,simple structure,convenient maintenance etc.

YL series double-value capacitor asynchronous-nbsp;motoris designed and manufactured in accordance with national standard,features good starting and running performance,low noise,small size,light weight-nbsp;and convenient maintenance-nbsp; etc.it may be used entensively for air compressor,water pump,blower fan,refrigeration,medical apparatus and small sized machinery etc.is especially suitable for conditions where only single-phwer supply is available.

YY series motor is sigle-phase capacitor running asynchronous motor,meets related stipulations of IEC standard.it is used extensively for various small sized machinery,medical apparatus,household appliances.blower as well as machinery ,apparatus and instrumention in chemical,textile and agricultural machinery etc departments,features good starting and running performance,simple strcture,convenient maintenance etc.-nbsp;-nbsp;

DF-E  double-inlet Air-conditioner Fan/ventilators

DF-E Centrifugal air-conditioner fan has the features like large air volume,low noise,compact structure,firmness and durable performance,beautiful appearance,convenience for installing and using,etc.It's suitable for all kinds of AHU,cold and warm air heating radiators,etc.It can also be used in mining industry or public room to ventilate.The conveying medium should be air and other natural but harmless gas.There is no granulated matters allowded in the air.And the dust should be no more than 150mg/m3.

Y6-30 Boiler centrifugal and Induced draft fan/ ventilation fan

This kind of ventilations are used for boiler.Its features are high efficiency,low noise,etc.The medium should be non-corrosive and non-adhesive gas with temperature less than 250 deg C.

DF low noise centrifugal air blower/ventilation fan

DF centrifugal fan is with excellent technical design.The material is firm and the performance is steady.It has obvious function to lower noise.The fans have features such as low noise,high efficiency,long life,convenience for installation,etc.It is widely used in telecommunications industry,power industry,electrification of industry,electronics industry,geological industry,mining industry,ship industry,papermaking industry,etc.It is specially used for plasitc machine,printing machine,drying machine,etc to ventilate and control temperature.

KDF5-58E Centrifugal Ventilator/ ventilation fan

KDF5-58E is a centrifugal ventilator we research and produce based on the Italian RZ,German KKT and other contries' technology.After testing,the fans have used advanced technology.The fans have the features that high efficiency,large air volume,low noise,etc.It is an ideal ventilator to match the air-conditioner and purifying system.

-nbsp;

C4-73 Dust-Exhausting Centrifugal Ventilator/ ventilation fans

C4-73 dust-exhausting centrifugal ventilators have the features that they are not easy to be dusty and they are durable.This fan is suitable to exhaust gas that includes dust,wood flour,small fiber,etc.if there are hard granulated matters in the dust,the fans should be matched with dust-exhausting set.It is also used to ventilate and exchange air.The fans are mainly made up of impeller,inlet,body,transmission part and motor.It have lett-rotated and right-rotaed types.

FC6-48 exhaust ventilator for textile industry

FC6-48-11 Exhaust ventilators are made for exhaust system in textile mills to clean cotton and induce fallen cotton.This product can also used to deliver raw cotton,wool and other matters with fiber.

The fans can be left-rotated and right rotated.If the impeller clockwise rotates from the motor side or bearing pedestal side,the fan is clockwise  rotated fan.On the contrary,it is reversely rotated fan.The outlet position is showed by the angles of the fans' outlet.

There are totally 10 sizes and they are driven in type C or type A.You can choose according to your situation.

The fans are mainly made up of impeller,inlet,transmission part,pedestal,protective part,etc.The impeller is cast from 8 or 10 pcs of straight blades and spindles.They have been dynamic balancing corrected and operating steadily.The material is an alloy of aluminum so the fans are explosion-proof.The semi-open impeller enable the fans to avoid being adhesive and being blocked.

4-68 Centrifugal exhaust fan / centrifugal ventilator

4-68 Centrifugal ventilators can be used in common plants and large-scaled building to exchange air.It can both induce air and exhaust gas.The medium should be air and other unnatural but harmless,non-corrosive to steel gas whose temperature should not surpass 80 deg C.There should be no adhesive matters.The dust or hard granulated matters in air should be less than 150mg/m3.

4-68 Centrifugal ventilator / Centrifugal exhaust fan

4-68 Centrifugal ventilators can be used in common plants and large-scaled building to exchange air.It can both induce air and exhaust gas.The medium should be air and other unnatural but harmless,non-corrosive to steel gas whose temperature should not surpass 80 deg C.There should be no adhesive matters.The dust or hard granulated matters in air should be less than 150mg/m3.

4-79A centrifugal fan/ Centrifugal blower

4-2x29E and 4-79A centrifugal ventilators can convey air and other unnatural but harmless,non-corrosive to steel gas.There should be no adhesive matters in the air.The dust or hard granulated matter should be no more than 150mg/m3.The ambient temperature shoud be less than 80 deg C.It has a good pneumatic performance.The impeller and belt are both strictly static and dynamic balancing corrected.Therefore,the fans have features such as steady operation,little vibration,high efficiency,long life,etc.

It is widely used in mining industry,large-scaled building,hotel,restaurants etc to ventilate and exhaust smoke.

4-2x79E centrifugal ventilator / ventilation fan

4-2x29E and 4-79A centrifugal ventilators can convey air and other unnatural but harmless,non-corrosive to steel gas.There should be no adhesive matters in the air.The dust or hard granulated matter should be no more than 150mg/m3.The ambient temperature shoud be less than 80 deg C.It has a good pneumatic performance.The impeller and belt are both strictly static and dynamic balancing corrected.Therefore,the fans have features such as steady operation,little vibration,high efficiency,long life,etc.

It is widely used in mining industry,large-scaled building,hotel,restaurants etc to ventilate and exhaust smoke.

4-72 anti-explosion Centrifugal ventilator/ ventilation fanner

4-72 Centrifugal Ventilator can convey air and other unnatural but harmless to steel,non-corrosive gas.No adhesive matters are allowded in the air.The dust and hard granulated matters are less than 150mg/m3.The ambient temperature is less than 80 deg C.The fans have a good pneumatic performance.Their features are steady operation,less vibration,high efficiency,long life..There are totally 4 driving types:A,B,C and D type.

This kind of fans are widely used in mining industry,high building,hotels etc to ventilate and air exchange.etc.

-nbsp;

4-72 Centrifugal ventilation fans / centrifugal ventilator

4-72 Centrifugal Ventilation Fans can convey air and other unnatural but harmless to steel,non-corrosive gas.No adhesive matters are allowded in the air.The dust and hard granulated matters are less than 150mg/m3.The ambient temperature is less than 80 deg C.The fans have a good pneumatic performance.Their features are steady operation,less vibration,high efficiency,long life..There are totally 4 driving types:A,B,C and D type.

This kind of fans are widely used in mining industry,high building,hotels etc to ventilate and air exchange.

4-72 Centrifugal ventilator/ ventilation fanner

4-72 Centrifugal Ventilator can convey air and other unnatural but harmless to steel,non-corrosive gas.No adhesive matters are allowded in the air.The dust and hard granulated matters are less than 150mg/m3.The ambient temperature is less than 80 deg C.The fans have a good pneumatic performance.Their features are steady operation,less vibration,high efficiency,long life..There are totally 4 driving types:A,B,C and D type.

This kind of fans are widely used in mining industry,high building,hotels etc to ventilate and air exchange.

5-29 High Pressure Centrifugal ventilator/ ventilation fanner

5-29 High pressure centrifugal ventilators are used to supply and inducing air.It is also used to convey non-corrosive,unnatural and non-adhesive gas.It is specially used to convey when processing cashmere.Sometimes we use it to blow for cupola.Pay attention,the medium temperature should not surpass 80 deg C,and the dust in air should not surpass 150mg/m3.Its features are high efficiency,saving energy,etc.

Model 5-29 High Pressure Centrifugal Fanner is used transport,absorb air and transport other gas with non-corrosiveness,non self-ignition and non adhesive matters,which especially suits to process and transportation of cotton velvet.It is also used in blowing and refining of towering stoves.The temperature of the conveying medium does not surpass 80 deg C and dust content does not surpass 150 mg/m3. It has features of high efficiency and low consumption.

8-09 Centrifugal Ventilator/  ventilation fan

8-09 and 9-12 Centrifugal fans are specially produced for cupola furnace.It meets the blowing perfomance demand of cupola furnace whose melting rate is 1-7L/h.It is also used to blow for all kinds of furnaces and smithery furnace.It can also be used to convey non-corrosive,unnatural and non-adhesive gas.The medium should be less than 80 deg C and there should be dust or hard granulated matters no more than 150mg/m3.

8-09 Cupola-used High Pressure Centrifugal Fanner complies with requirements of blast function of cupolas with 1-7L/H melting rate.The fanner is also used to blast in all kinds of furnaces and refining stoves and convey air and other gas with non-corrosiveness,unnatural,non-adhesive matters.The temperature of the transporting medium does not surpass 80 deg C and the including dust and flinty granules are not bigger than 150mg/m3

9-26 Centrifugal Fanner/ Centrifugal ventilation

9-19,9-26 High Pressure Centrifugal Ventilators are widely used to convey materials and non-adhesive gas.The medium for conveying should be no more than 80 deg C.There dust or hard granulated matters should be less than 150 mg/m3.The fans are suitable for smithery industry,glass industry,ceramics industry,radio industry,electroplating industry,battery industry ,etc to ventilate through high pressure.It is also for the industries that do processing food,feed,fine ore,plastic,etc to convey materials.

9-19 High Pressure Centrifugal Ventilator

9-19,9-26 High Pressure Centrifugal Ventilators are widely used to convey materials and non-adhesive gas.The medium for conveying should be no more than 80 deg C.There dust or hard granulated matters should be less than 150 mg/m3.The fans are suitable for smithery industry,glass industry,ceramics industry,radio industry,electroplating industry,battery industry ,etc to ventilate through high pressure.It is also for the industries that do processing food,feed,fine ore,plastic,etc to convey materials.

Y6-41 Centrifugal Induced Draft Fan/ Induced centrifugal fan

This kind of products are for all kinds of industrial boilers with evaporation amount 0.5-10t/h.It can be left-rotated and right-rotated.The outlet can be adjusted at 0 deg,90deg,180deg and 270deg four angles.The fans can be used to match with industrial boiler.

The fans are driven in C and D types.It is matched with governor valve,base and vibration reduction pad.

Y5-47 Boiler Centrifugal Induced Fan/centrifugal induced draft fan

Y5-47 boiler centrifugal induced fan has the features such as low noise,simple structure,flexibility to adjust air volume and flow direction.It is suitable for industrial boiler in which there are smoke-exhausting set .The medium air should be in temperature of less than 250 deg C.It is driven in type C and D.It is matched with air volume adjusting set.If vibration absorber is used,clients can lay the fans on the earth directly without any earthing screw.It is easy to install and test.

T4-72 Centrifugal fan/ ventilator

T4-72 centrifugal fans  can convey air and other unnatural but harmless ,non-corrosive gas.No adhesive matters are allowded.The hard granulated dust should be less than 150mg/m3.The temperature of the air should be less than 80 deg C.The fans are used in factory and buildings to exhaust air.It can both supply air and exhaust air.

6-30 Dust-Exhausting Centrifugal Ventilator /ventilation fan

The conveying medium of 6-30 centrifugal ventilators is air and other non-corrosive,unnatural,non-adhesive gas..The ambient temperature should not surpass 80 deg C.The fan has the features such as high pressure,small air volume,etc.It is used to convey when prodcessing with the foodstuff and cotton.

This medium elected by 6-30 Centrifugal Fanner is air and other gas with non-corrosiveness,non-selfignition and non adhesive matters within temperature of 80 deg C.The kind of fanner has features of high pressure and low flux.which is suitable to wind power transportation of process of foodstuff and cotton.

-nbsp;

-nbsp;

CF4-82 Kitchen Special-Purpose Centrifugal Ventilator / Low noise - high efficient centrifugal fan

CF4-82 is driven in type A.The motor is fixed in one side of the fans.No extra holder is needed.The structure is compact and is convenient for installation.It looks beautiful.The inlet is easy to be adjusted.the blades made of flat plate can reduce the greasy dirt on the blades and is easy to clean.There is a set for noise elimination in the inlet so it produces less noise than 4-72 in same size.

This kind of fan is specially designed for kitchen to exhaust smoke.It can also be used to ventilate and exchange air.

ZDG fire fighting Cabinet Centrifugal ventilator/ dual-purpose centrifugal fan

ZDG series of low noise cabinet centrifugal ventilators are new products we develp based on advanced technology home and abroad.It have two functions: exhaust in fire fighting ,and air exchange.It has features such as high efficiency,low noise,convenience for installation,steady operation,large air volume,high-temperature resistance,etc.It is new product for residential building to remove smoke when fire fighting.It's also attactive becasue of compact structure and beautiful appearance. The framework is made of sectional material .The box board is made of cold rolled steel sheet adopting double-decked structure.There are fireproofing and warm-keeping materials inside the ventilation so as to avoid condensation in high-temperature place.It is more efficient in lowing noise and reducing vibration.

11-62E low noise Multi-wing Centrifugal Ventilator/ventilation fan

11-62E low noise multi-wing centrifugal fan is a product derived from 11-62A.It is driven by belt,and its air volume  and pressure can be adjusted.Therefore clients have more choice of paramters.This kind of fans have features of large air volume,low noise,steady operation.It's best choice for restaurant  and hotels to exhaust.

-nbsp;

11-62A multi-vane Centrifugal Ventilator/multi-wing ventilator

11-62A Low noise multi-vane centrifugal ventilator is designed to meet the developing demand of purifying,environment protection, and noise lowing.The fans adopts multi-purpose optimized design of noise,effieciency and other parameters,and have a good pneumatic performance.Impeller and belt pullery are all strictly dynamic  balancing corrected.Therefore,it operated steadily with low noise,large air volume,less vibration and long life.

It is widely used for the kitchens in canteens,hotels,food store to ventilate and exhaust.It is useful and well-adaptable.

-nbsp;

DDT Low Noise Multi-wing Centrifugal Ventilator/ ventilation fan

DDT Low Noise Multi-wing Centrifugal Ventilator is designed to meet the developing demand of purifying,environment protection, and noise lowing.The fans adopts multi-purpose optimized design of noise,effieciency and other parameters,and have a good pneumatic performance.Impeller and belt pullery are all strictly dynamic  balancing corrected.Therefore,it operated steadily with low noise,large air volume,less vibration and long life.

It is widely used for the kitchens in canteens,hotels,food store to ventilate and exhaust.It is useful and well-adaptable.

HTF fire fighting high-temperature exhaust fan / ventilation fan

HTF fire fighting high temperature exhaust fan is a new product through optimized design.It has the features such as high efficiency and smooth curved surface,etc.It's good for saving energy.The fans are driven directly by motor.It can be driven at single speed to ventilate and exhaust in high temperature area when fire fighting if the residential buildings  need.

It is widely used to  residential buildings,drying oven,basement parking lot,subway etc.

FZY axile fan with External Rotor Motor / axial-flow ventilator

The series of ventilators are made up of asynchronous motor operated by rotor single-phase capacitance or three-phase asynchronous motor,double-flange cylinderical body,net rack,and blades.Its features are large air volume,less vibration,low noise,steady operation ,etc.

This kind of fans is used in  the place where large ventilation is needed.It can also be used in buildings,factories etc to exchange and clear air.

FZY Axial-Flow Ventilator with External Rotor Motor / Axile fan

The series of ventilators are made up of asynchronous motor operated by rotor single-phase capacitance or three-phase asynchronous motor,double-flange cylinderical body,net rack,and blades.Its features are large air volume,less vibration,low noise,steady operation ,etc.

This kind of fans is used in  the place where large ventilation is needed.It can also be used in buildings,factories etc to exchange and clear air.

Rice Winnowing Fan / ventilator

Rice Winnowing Fan is a low power and energy-saving fan with less noise. In the hope to control the source of sound and enhance the efficiency of flow force,we match the slip ring in reasonably-designed structure and asynchronous low noise motor.Therefore,it is operated steadily with low noise,high efficiency and saving-energy.

This fan is widely used in mining industry ,residential building,metallurgy,electrical place .warehouses,etc to ventilate and supply air. 

QZA Axial-flow Ventilator/ axile fan

QZA ventilators are usually used in factories,warehouses,offices,and residential buildings to ventilate and enhance heat dissipation.If its body is removed,the fans can be used freely.It can also be intervally installed in a long pipeline to increase the wind pressure in the pipe.

QZA are mainly made up of impeller and body.

The impeller is composed with blades made of steel sheet and big hub.Its pressure is higher than axial-flow ventilator's.The blades can be required to be welded  with the hub in a proper angle.

The body is made up of ventilation canister and holder,all of which are made of steel sheet and sectional material.There is a gap between the  straight cylindrical ventilation canister and impeller.

-nbsp;

-nbsp;

-nbsp;

HL3-2A mixed flow and low noise boiler fan/flow-mixed fan

HL3-2A/PYHL-14 ventilators ,designed according to "Quasi-ternary" flow theory,are made up of linear canister,conical hub,twist blades.Its inlet is matched with slip ring or arc noise elimination equipment.When the size is same,Its  pressure is higher than axial-flow ventilator's,and its air volume is larger than centrifugal fan's.Its features are high efficiency,compact structure,low noise,small volume.convenience for installation,etc.

This kind of fans are widely used in hotels,restaurants,stores,office buildings,gymnasium,etc to ventilate.It's also used in pipeline and mining industry to increase the pressure and exchange air.

WT35-11 Roofing Axial-flow ventilator/ rooftop axile fan

WT35-11,FWT35-11 roofing axial-flow ventilators are with large air volume.They can be designed to be bidirectionally rotated and reversible. The fan's features are low noise,lightness,steady operation,high efficiency,corrosion-proof performance,etc.It is suitable for Oil industry,Chemical industry,Textile industry,Metallurgy industry etc to ventilate in the plants and warehouse.

T30 Axial-flow fan/axile draft fan

T30 Axial-flow fan is a simply-structured fan with less noise and low pressure.It is suitable for factories,warehouses,offices and residential house to ventilate and exchange air or enhance heat dissipation.Its body can also be removed ,therefore,the fan can be installed in pipeline to increase the pressure in it.

T40 Axial-flow Ventilator /Axile fan

T40 Axial-flow Ventilator is suitable for factories,warehouses,offices,residential houses to exchange air or enhance heat dissipation.If the body is removed,the fans can be freely used.It can also be intervally installed in a long pipeline so as to increase the pressure in the pipe.

As clients requested,the structure of the KT40  fans is designed to place the motor on the fan body and are driven by belt.The performance of KT40 is the same as T40's.Clients can change their rotation to meet the performance they need.The most attractive function is that it can exhaust high-temperature air and moisture-proof air.

BT35-11 Explosion-proof Axial-flow Ventilator/ Axile draft fan

T35-11,BT35,FT35 Axial-Flow Ventilators are products to replace 30K4 products.Based on analysis and comparation with the similar products abroad,through optimized design,the structure of the impeller is confirmed.The motor is improved and the loss of air flow is reduced.Therefore,the efficiency of the fans is 89.5% higher when the noise is 3.6dB lower than Noise-nbsp;A standard.We strengthen the welding of blades and impeller so that the blades can avoid breaking.

This series of fans are suitable to convey non-inflammable,non-explosive,non-corrosive gas in which no obvious dust can be found.The temperature shouldn't surpass 60 deg C.The fans are widely used in factories,warehouses,offices,residential houses to ventilate or enhance heat dissipation.They can be intervally installed in a long pipeline to increase the pressure in the pipe.

BT35-11 is an Explosion-proof Axial-Flow Ventilators and it can be used to-nbsp;exchange the inflammable and explosive gas.FT35-11 is a Corrosion-proof Axial-Flow ventilator which is used to convey the corrosive gas.Its performance and parameters is the same as T35-11's.

SF Low Noise Axial-flow fan

SF Low Noise Axile Ventilators have the advantages such as smooth streamline form surface,steady operation,high efficiency,low noise,saving energy,etc.SF series of ventilators can be devided into 4 types  according to the using requirement,they are pipelined type,fixed one,wall one and post one.If devided according to the diameters of impeller,there will be 12 specifications.

This kind of fans are widely used in mining industry and residential building to exhaust in wall type,blast in post type and ventilate in pipelined type.It is also used in Chemical , light industrial,food,medical,electrical,transporting places and warehouse to match the HVAC.

-nbsp;

-nbsp;

-nbsp;

SF Low Noise Axile Ventilator

SF Low Noise Axile Ventilators have the advantages such as smooth streamline form surface,steady operation,high efficiency,low noise,saving energy,etc.SF series of ventilators can be devided into 4 types  according to the using requirement,they are pipelined type,fixed one,wall one and post one.If devided according to the diameters of impeller,there will be 12 specifications.

This kind of fans are widely used in mining industry and residential building to exhaust in wall type,blast in post type and ventilate in pipelined type.It is also used in Chemical , light industrial,food,medical,electrical,transporting places and warehouse to match the HVAC.

-nbsp;

-nbsp;

-nbsp;

BZF anti-explosion Axial Flow fan

BZF Against explosion Axile Draft Fan/Axial Flow fan

BZF series of against explosion axile draft fans are used in the dangerous places : Area1 and Area2,where there are explosive air mixture at or below the level II kind B Stage,T4 Group.It is used for the plants and warehouse to ventilate ,exchange air or enhance heat dissipation.

It should be operated in the following conditions:AC 50Hz,Voltage 220V or 380V. The place where there is no heavy corrosion gas and no obvious dust.

We can add installation holders if clients request.

The fans conform with the standard mark Exd II BT4.

It is made up of explosion-proof motor,blades,ventilation canister,etc.The blades are made of aluminum and the ventilation canister is made of steel sheet welded with sectional material.The power line can be steel conduit or cabling.There is an earthing screw outside the fan

.

This series product is suitable for II kind of B the level T4 group and following rank,the group other fire damp mixture(1 area and 2 areas) The place,as the workshop,the warehouse well ventilated takes a breath or strengthens using of the warm air radiation.

This series product also make additionally build peacefully according to installation shelf.

This series product conforms to the explosion-proof to symbolize ExdII BT4 request.

BZF Against explosion Axile Draft Fan/Axial Flow fan

BZF series of against explosion axile draft fans are used in the dangerous places : Area1 and Area2,where there are explosive air mixture at or below the level II kind B Stage,T4 Group.It is used for the plants and warehouse to ventilate ,exchange air or enhance heat dissipation.

It should be operated in the following conditions:AC 50Hz,Voltage 220V or 380V. The place where there is no heavy corrosion gas and no obvious dust.

We can add installation holders if clients request.

The fans conform with the standard mark Exd II BT4.

It is made up of explosion-proof motor,blades,ventilation canister,etc.The blades are made of aluminum and the ventilation canister is made of steel sheet welded with sectional material.The power line can be steel conduit or cabling.There is an earthing screw outside the fan.

This series product is suitable for II kind of B the level T4 group and following rank,the group other fire damp mixture(1 area and 2 areas) The place,as the workshop,the warehouse well ventilated takes a breath or strengthens using of the warm air radiation.

This series product also make additionally build peacefully according to installation shelf.

This series product conforms to the explosion-proof to symbolize ExdII BT4 request.

JS Square-shaped axile draft fan/axial-flow ventilator

JS Axial-Flow Fan is a square-shaped axial fan which produces less noise in simple structure.It's features are large coefficient of air volume,compact structure,convenience for installation and moving,etc.The fan is made up of blades,housing,motor,driving set,etc.It is driven through belt in type C.The medium should be non-corrosive and non-explosive gas.The ambient temperature should be among -10 deg C and 60 deg C.The dust and hard granulated matters should be less than 150 mg/m3.

This kind of fans are widely used in place ,such as mining industry,warehouses,offices,residents,etc where ventilation is needed.

-nbsp;

Strong Force Electric Fans /commercial fans

Strong Force Electric Fans are commonly used in the workshops,warehouses,basements,canteens,etc to prevent sunstroke and lower temperature.The ambient temperature should not surpass 40 deg C,and there should be non-corrosive gas and no granulated dust in the air.The fans are mainly composed of motor,swinging part,blades,net enclosures and wall-mounting or standing holders.The Aluminum blades have been static balancing corrected and run steadily.

CZR series  Centrifugal  AC blower/air blower

CZR series of centrifugal blowers that are driven by single-phase capacitance driving motor;CZT series are driven by three-phase AC asynchronous motor .They can produce large air volume with high Wind Pressure.Saving energy,temperature shortly-increased,beautiful appearance and so on are their features.

These blowers are widely used in households,canteens,small-scale boiler,ironmaking industry where they need equipment to help combusting and blowing film.They can also be used to supply and cool down air.

asynchronous motor

Zhouzhou promise you products with good quality,competitive price and excellent service.

excellenct service after sale

competitive price

Zhouzhou is your good choice !

wall-mounted fans

strong force

We promise all the products from Zhouzhou are with good quality ,competitive price,and excellent service.

Zhouzhou promise you our products with good quality,competitive price and excellent service after sale.

all kinds of blowers with good quality and excellent service after sale

Zhouzhou can be trusted as your good supplier.

ventilation fan

fans

Good quality,competitive price and excellent service.

Shanghai Zhouzhou Machinery Co.,Ltd is a professional fan manufacturer .We  promise that we can be trusted

axile fan

Shanghai Zhouzhou Machinery Co.,Ltd is a professional fan manufacturer.

Zhouzhou promise to every customer that we will offer products with good quality and excellenct service after sale.