electric motor|centrifugal blower

FZY axile fan with External Rotor Motor / axial-flow ventilator

This kind of fans is used in the place where large ventilation is needed.It can also be used in buildings,factories etc to exchange and clear air.

T30 Axial-flow fan

Thu, 30 Jun 2011 11:22:02 GMT

T30 Axial-flow fan/axile draft fan

T30 Axial-flow fan is a simply-structured fan with less noise and low pressure.It is suitable for factories,warehouses,offices and residential house to ventilate and exchange air or enhance heat dissipation.Its body can also be removed ,therefore,the fan can be installed in pipeline to increase the pressure in it.

SF Axial-Flow Ventilator

Thu, 30 Jun 2011 11:21:35 GMT

SF Axial Flow Ventilation/ Axile draft fan

SF Low Noise Axile Ventilators have the advantages such as smooth streamline form surface,steady operation,high efficiency,low noise,saving energy,etc.SF series of ventilators can be devided into 4 types according to the using requirement,they are pipelined type,fixed one,wall one and post one.If devided according to the diameters of impeller,there will be 12 specifications.

This kind of fans are widely used in mining industry and residential building to exhaust in wall type,blast in post type and ventilate in pipelined type.It is also used in Chemical , light industrial,food,medical,electrical,transporting places and warehouse to match the HVAC.

SF low noise Axile Ventilator

Thu, 30 Jun 2011 11:20:55 GMT

SF Low Noise Axile Ventilator

BZF Against explosion Axile Draft Fan

Thu, 30 Jun 2011 11:20:32 GMT

BZF Against explosion Axile Draft Fan/Axial Flow fan

BZF series of against explosion axile draft fans are used in the dangerous places : Area1 and Area2,where there are explosive air mixture at or below the level II kind B Stage,T4 Group.It is used for the plants and warehouse to ventilate ,exchange air or enhance heat dissipation.

It should be operated in the following conditions:AC 50Hz,Voltage 220V or 380V. The place where there is no heavy corrosion gas and no obvious dust.

We can add installation holders if clients request.

The fans conform with the standard mark Exd II BT4.

It is made up of explosion-proof motor,blades,ventilation canister,etc.The blades are made of aluminum and the ventilation canister is made of steel sheet welded with sectional material.The power line can be steel conduit or cabling.There is an earthing screw outside the fan.

This series product is suitable for II kind of B the level T4 group and following rank,the group other fire damp mixture(1 area and 2 areas) The place,as the workshop,the warehouse well ventilated takes a breath or strengthens using of the warm air radiation.

This series product also make additionally build peacefully according to installation shelf.

This series product conforms to the explosion-proof to symbolize ExdII BT4 request.

2JZ double-stage high pressure blower

Thu, 30 Jun 2011 11:22:50 GMT

2JZ series double-stage high pressure blower/ air blower

2JZ series double-stage & high pressure centrifugal blower is a new product that appears after we researched and developed based on a series of high pressure blower both at home and abroad.It is with high pressure and low noise.The structure of the impeller is double-stage.It's also attractive because of reasonable and compact design,beautiful appearance and steady operation.

This kind of blowers are widely used in industries where ventilation is needed such as the Smithery Industry,Glass Industry,Electroplating Industry,Ceramics Industry,etc .They are also used in Granary,Feed Industry,mining Industry and so on to convey the materials.The medium should be air and other unnatural but harmless to human beings,non-corrosive gas.No adhesive matters are allowded.The dust in the air should be no more than 150mg/m3 and ambient temperature should be no more than 80 deg C.

power(W)	pressure(Pa)	air volume(m3/h)	material	voltage(V)	rotation(r/min)	frequency(Hz)
900	5100-4650	200-300	Aluminium alloy	220/380	2800	50
2200	6420-5300	400-670	Aluminium alloy	220/380	2800	50
4000	8100-2550	400-1300	Aluminium alloy	220/380	2900	50
7500	7650-3430	1150-1600	Aluminium alloy	220/380	2900	50
11000	11920-9520	1030-1700	Aluminium alloy	220/380	2930	50
18400	10400-3500	2070-2920	Aluminium alloy	220/380	2930	50
50	420	150	Aluminium alloy	220/380	2800	50

Y9-38 Boiler induction draft fan

Thu, 30 Jun 2011 11:22:42 GMT

Y9-38 Boiler induction draft fan/ centrifugal ventilator

This kind of ventilations are suitable for industrial boiler which has been matched with economizer and dust-exhausting set.The boiler evaporation amount should be 0.5-35t/h.The ambient temperature should be less than 250 deg C.You must install a exhausting set with efficiency more than 85% before using the fans,so that the dust in smoke going into the fans will be reduced.By doing this,it can not only reduce the pollution to the environment,but also enable the fans to be durable.

4-79A centrifugal fan

Thu, 30 Jun 2011 11:22:36 GMT

4-79A centrifugal fan/ Centrifugal blower

4-2x29E and 4-79A centrifugal ventilators can convey air and other unnatural but harmless,non-corrosive to steel gas.There should be no adhesive matters in the air.The dust or hard granulated matter should be no more than 150mg/m3.The ambient temperature shoud be less than 80 deg C.It has a good pneumatic performance.The impeller and belt are both strictly static and dynamic balancing corrected.Therefore,the fans have features such as steady operation,little vibration,high efficiency,long life,etc.

It is widely used in mining industry,large-scaled building,hotel,restaurants etc to ventilate and exhaust smoke.

HBJS Aluminum Alloy centrifugal fan

Thu, 30 Jun 2011 11:22:31 GMT

HBJS Aluminum Alloy centrifugal fan/ventilation fan

HBJS series are the fans specially designed for carton machine to deliver paper and clean dust.The semi-open impeller is cast from 10 forwards curved blades and a hub.It is featured by high pressure,steady pressure curves.It is not easy to be dusty and operated without producing spark.

This kind of fans are also suitable for dust-exhausting system to convey the impurities such as fiber,cashmere,etc and to convey the air of that includes wood flour ,dust,etc.The ambient temperature should be less than 80deg C

YC series capacitor start asynchronous motor

Thu, 30 Jun 2011 11:22:25 GMT

Application:compressors,refrigerator,remedy apparatus and machine tools,etc.

Feature:high starting toque,low energy consumption.Cast iron or cast aluminum frames.The basic type is rated at 220V/50HZ.it also can be provided with 110v/220v,10v,240v and 60HZ.

YS series three-phase asynchronous motor

Thu, 30 Jun 2011 11:22:19 GMT

YS series three-phase asynchronous motor meets related stipulation of IEC standard.it is used extensively for various small sized machinery,medical apparatus,household appliances,blower as well as machinery,apparatus and instrumentation in chemical,textile and agricultural machinery etc depatments,features good starting and running performance,simple structure,convenient maintenance etc.

T40 Axial-flow Ventilator

Thu, 30 Jun 2011 11:20:26 GMT

T40 Axial-flow Ventilator /Axile fan

T40 Axial-flow Ventilator is suitable for factories,warehouses,offices,residential houses to exchange air or enhance heat dissipation.If the body is removed,the fans can be freely used.It can also be intervally installed in a long pipeline so as to increase the pressure in the pipe.

As clients requested,the structure of the KT40 fans is designed to place the motor on the fan body and are driven by belt.The performance of KT40 is the same as T40's.Clients can change their rotation to meet the performance they need.The most attractive function is that it can exhaust high-temperature air and moisture-proof air.

WT35-11 Roofing Axial-flow ventilator

Thu, 30 Jun 2011 11:19:40 GMT

WT35-11 Roofing Axial-flow ventilator/ rooftop axile fan

WT35-11,FWT35-11 roofing axial-flow ventilators are with large air volume.They can be designed to be bidirectionally rotated and reversible. The fan's features are low noise,lightness,steady operation,high efficiency,corrosion-proof performance,etc.It is suitable for Oil industry,Chemical industry,Textile industry,Metallurgy industry etc to ventilate in the plants and warehouse.

Performance

NO	Power	Air-flow	Pressure	Noise	Voltage
NO	(KW-P)	（m3/h)	（Pa)	（d B)A	V
3.15	0.37-2	4141	237	≤66	380
3.15	0.12-4	2072	59	≤63	380
4	1.1-2	8513	380	≤67	380
4	0.25-4	4263	95	≤67	380
4.5	0.37-4	6070	121	≤67	380
5	0.55-4	8327	149	≤68	380
5.6	1.1-4	11682	186	≤69	380
5.6	0.37-6	7724	81	≤65	380
6.3	1.5-4	16639	236	≤70	380
6.3	0.75-6	11016	104	≤68	380
7.1	3-4	23815	300	≤73	380
7.1	0.75-6	15766	131	≤67	380
8	5.5-4	34073	380	≤72	380
8	1.5-6	22556	167	≤68	380
9	3-6	32119	211	≤68	380
10	4-6	44062	261	≤70	380
11.2	7.5-6	61091	337	≤72	380

FZY Axial-Flow Ventilator with External Rotor Motor

Thu, 30 Jun 2011 11:19:26 GMT

FZY Axial-Flow Ventilator with External Rotor Motor / Axile fan

This kind of fans is used in the place where large ventilation is needed.It can also be used in buildings,factories etc to exchange and clear air.

SF low noise Axial-Flow fan

Thu, 30 Jun 2011 11:19:19 GMT

SF Low Noise Axial-flow fan

JS square axial fan

Thu, 30 Jun 2011 11:16:46 GMT

JS Axial-Flow Fan is a square-shaped axial fan which produces less noise in simple structure.It's features are large coefficient of air volume,compact structure,convenience for installation and moving,etc.The fan is made up of blades,housing,motor,driving set,etc.It is driven through belt in type C.The medium should be non-corrosive and non-explosive gas.The ambient temperature should be among -10 deg C and 60 deg C.The dust and hard granulated matters should be less than 150 mg/m3.

This kind of fans are widely used in place ,such as mining industry,warehouses,offices,residents,etc where ventilation is needed.

blade rotation（r/min）	motor rotation（r/min)	air volume(m3/h)	noise dB(A)	power(kw)	voltage(V)	dimension
L.	W.	H.
520	1400	21000	70	0.37	380	800	800	370
520	1400	28000	70	0.55	380	1000	1000	370
480	1400	31000	70	0.75	380	1100	1100	370
420	1400	42000	70	1.1	380	1380	1380	370
420	1400	42000	70	1.1	380	1380	1380	370
400	1400	50000	70	1.5	380	1530	1530	370
400	1400	50000	70	1.5	380	1530	1530	370
360	1400	63000	70	1.5	380	1750	1750	370

SWF-I flow-mixed ventilator

Thu, 30 Jun 2011 11:21:49 GMT

SWF-I flow-mixed ventilator/mixed flow fans

SWF-I flow-mixed ventilator is a novel fan which is not belong to Axial-flow ventilator or Centrifugal fan but have both of their features.When the size is same,its pressure is higher than axial-flow ventilator's,and its air volume is larger than centrifugal fan's.It's featured as its wide effiecient-operation area,high efficiency,etc.This kind of fans are widely used in office buildings,hotels and other large-scaled residential buildings to match their ventilation system.It is also used in cold storage,textile industry,etc to exchange air,so as to replace low pressure centrifugal ventilators and high pressure axial-flow fans,as they have to be matched with noise elimination measurements.

SJG Oblique-Flow Pipeline Fan

Thu, 30 Jun 2011 11:21:42 GMT

SJG obique-flow Pipeline Fan / Pipe ventilator

SJG series of axial-flow pipeline fan are derived from SWF series.Its impeller are chaged from that of axial-flow fan,and it adapts drum-type ventilation canister so that the direction of the air flow is oblique. The features of the fans are as below:

When the sizes are the same,its air flow volume is larger than that of centrifugal fans.Its pressure is higher than that of axial-flow fan.

The fans' volume is smaller than that of centrifugal fans.It has advantages like wide efficient-operation area,low noise,occupying less area,convenience for installation,etc.This kind of fans don't influence the arrangement and trend of pipeline.It is most suitable to increase pressure and ventilate in pipe.In a narrow space,you will find its compact structure is very attactive.

SJG series are widely used in minding industry,restaurants,hotels,museums,gymnasium,high buildings to exchange air.

SJG/The main technical Parameters

(No)	Speed (r/min)	Power (Kw)	Voltage (V)	Air-flow (m³/h)	Pressure (Pa)	Noise dB(A)
2.0F	1450	0.09	380	725-275	45-103	≤58
2.5F	1450	0.18	380	1420-590	76-158	≤60
30F	1450	0.37	380	2500-900	100-240	≤61
3.5S	960	0.55	380	1880-540	100-180	≤59
3.5F	1450	0.55	380	2650-950	230-380	≤61
4.0S	960	0.55	380	2800-940	146-230	≤60
4.0F	1450	1.1	380	4200-1680	280-480	≤65
4.5S	960	0.75	380	4210-1240	175-280	≤61
45F	1450	22	380	5900-1900	320-610	≤66
5.0S	960	0.75	380	5700-2120	185-330	≤62
5.0F	1450	3.0	380	7920-3200	440-750	≤69
60S	960	2.0	380	9850-3400	260-500	≤65
6.0F	1450	5.5	380	13800-5800	630-1080	≤75
7.0S	960	4.0	380	14800-4500	400-720	≤73
8.0S	960	5.5	380	23700-9000	440-860	≤74

BPS Explosion-proof Exhaust Fan

Thu, 30 Jun 2011 11:16:21 GMT

BPS Explosion-proof Exhaust Fan/ anti-explosion exhausting fan

BPS 51 Explosion-proof Exhaust Fans are used in the dangerous places : Area1 and Area2,where there are explosive air mixture at or below the level II kind B Stage,T4 Group.In the line of Voltage 220V or 380V,50Hz,they are used for ventilation and cooling purpose.

The exhaust fans can be well operated in the following condition:

The place is at an altitude of less than 2000m.

The ambient temperature is:-20 deg C to 40 deg C

When 25 deg C,the ambient humidity is no more than 95%..

CZR low noise Centrifugal AC blower

Thu, 30 Jun 2011 11:21:29 GMT

CZR series low noise Centrifugal AC blower/air blower

CZR series of centrifugal blowers that are driven by single-phase capacitance driving motor;CZT series are driven by three-phase AC asynchronous motor .They can produce large air volume with high Wind Pressure.Saving energy,temperature shortly-increased,beautiful appearance and so on are their features.

These blowers are widely used in households,canteens,small-scale boiler,ironmaking industry where they need equipment to help combusting and blowing film.They can also be used to supply and cool down air.

Strong Force Electric Fans

Thu, 30 Jun 2011 11:21:24 GMT

Strong Force Electric Fans /commercial fans

Strong Force Electric Fans are commonly used in the workshops,warehouses,basements,canteens,etc to prevent sunstroke and lower temperature.The ambient temperature should not surpass 40 deg C,and there should be non-corrosive gas and no granulated dust in the air.The fans are mainly composed of motor,swinging part,blades,net enclosures and wall-mounting or standing holders.The Aluminum blades have been static balancing corrected and run steadily.

ZDG fire fighting Cabinet Centrifugal ventilator

Thu, 30 Jun 2011 11:20:20 GMT

ZDG fire fighting Cabinet Centrifugal ventilator/ dual-purpose centrifugal fan

ZDG series of low noise cabinet centrifugal ventilators are new products we develp based on advanced technology home and abroad.It have two functions: exhaust in fire fighting ,and air exchange.It has features such as high efficiency,low noise,convenience for installation,steady operation,large air volume,high-temperature resistance,etc.It is new product for residential building to remove smoke when fire fighting.It's also attactive becasue of compact structure and beautiful appearance. The framework is made of sectional material .The box board is made of cold rolled steel sheet adopting double-decked structure.There are fireproofing and warm-keeping materials inside the ventilation so as to avoid condensation in high-temperature place.It is more efficient in lowing noise and reducing vibration.

YY series single-phase asynchronous motor

Thu, 30 Jun 2011 11:21:08 GMT

YY series motor is sigle-phase capacitor running asynchronous motor,meets related stipulations of IEC standard.it is used extensively for various small sized machinery,medical apparatus,household appliances.blower as well as machinery ,apparatus and instrumention in chemical,textile and agricultural machinery etc departments,features good starting and running performance,simple strcture,convenient maintenance etc.

Y series three-phase asynchronous motor

Thu, 30 Jun 2011 11:21:02 GMT

Y series motor is fully enclosed self-fan cooled cage type three-phase asynchronous motor,is atate-of-the-art basic series,and meets related stipulations of IEC standard .this series of motor features high efficiency,energy saving,large starting torque,low noise,small vibration,high reliability,convenient operation and maintenance etc.it may be used extensively in general conditions withous inflammable,explosive or corrosive gases and on mechanical equipment with special requirement,e.g.metal cutting machine,pump,blower fan,transport machinery,agitator,agricutural machinery and machinery for food industry etc.

Axial-Flow Exhaust Fan

Thu, 30 Jun 2011 11:15:59 GMT

Axial-Flow Exhaust Fan/axile fan

FA series of Axial-Flow Exhaust Fans are driven by single-phase capacitance operated motor.FTA series are driven by three-phase asynchronous motor.Their reasonable structure,beautiful appearance,and firmness has attracted many customers.They are also durable and can save energy.

This kind of fans are suitable for factories,warehouses,offices,kitchens of canteens,basements,etc to exhaust and ventilate.They are for sunstroke prevention and cooling use.You can match it with shutters.

Technical parameter

No	Dia of blade	Air-flow	Power	Voltage
No	mm	m3/min	Kw	V
FA-30	300	28	80	220
FA-35	350	32	105	220
FA-40	400	48	150	220/380
FA-30	300	28	80	220
FA-35	350	32	105	220
FA-40	400	48	150	220/380
FTA-50(steel blade)	500	98	350	220/380
FTA-60(steel blade)	600	170	580	220/380
FTA-50(rivet blade)	500	98	350	220/380
FTA-60(rivet blade)	600	170	580	220/380
FTA-75(welding blade)	750	265	850	380
FA-50(Cast iron welding blade)	500	98	350	220/380
FA-60(Cast iron welding blade)	600	170	580	220/380
FA-75(Cast iron welding blade)	750	265	850	380

YS series three phase induction motor

Thu, 30 Jun 2011 11:20:46 GMT

Application:Ideal for driving small machine tools.meediocal,intrument,food processing apparatus and home application,etc.

Features:safety and reliable operation,easy maintenance.

Y2 three-phase induction motor

Thu, 30 Jun 2011 11:20:40 GMT

Y2 three-phase induction motor

Application:General purpose including cutting machine,pumps,fans,conveyors,machine tools of farm duty and foodprocess.

Feature:high efficiency and energy saving ,low noise and little vibration.The insulation class: is F,protective class is LP54 or IP55.

Circumstance for use:the altitude not exceeding 1000m above sea level.the ambient temperature subject to seasonal variations but exceed +40 and not less than -15.

BT35-11 Explosion-proof Axial-flow Ventilator

Thu, 30 Jun 2011 11:15:37 GMT

BT35-11 Explosion-proof Axial-flow Ventilator/ Axile draft fan

T35-11,BT35,FT35 Axial-Flow Ventilators are products to replace 30K4 products.Based on analysis and comparation with the similar products abroad,through optimized design,the structure of the impeller is confirmed.The motor is improved and the loss of air flow is reduced.Therefore,the efficiency of the fans is 89.5% higher when the noise is 3.6dB lower than Noise A standard.We strengthen the welding of blades and impeller so that the blades can avoid breaking.

This series of fans are suitable to convey non-inflammable,non-explosive,non-corrosive gas in which no obvious dust can be found.The temperature shouldn't surpass 60 deg C.The fans are widely used in factories,warehouses,offices,residential houses to ventilate or enhance heat dissipation.They can be intervally installed in a long pipeline to increase the pressure in the pipe.

BT35-11 is an Explosion-proof Axial-Flow Ventilators and it can be used to exchange the inflammable and explosive gas.FT35-11 is a Corrosion-proof Axial-Flow ventilator which is used to convey the corrosive gas.Its performance and parameters is the same as T35-11's.

JS Square-shaped axile draft fan

Thu, 30 Jun 2011 11:15:22 GMT

JS Square-shaped axile draft fan/axial-flow ventilator

This kind of fans are widely used in place ,such as mining industry,warehouses,offices,residents,etc where ventilation is needed.

T4-72 Centrifugal fan

Thu, 30 Jun 2011 11:20:04 GMT

T4-72 Centrifugal fan/ ventilator

T4-72 centrifugal fans can convey air and other unnatural but harmless ,non-corrosive gas.No adhesive matters are allowded.The hard granulated dust should be less than 150mg/m3.The temperature of the air should be less than 80 deg C.The fans are used in factory and buildings to exhaust air.It can both supply air and exhaust air.

CZR low noise Centrifugal AC blower

Thu, 30 Jun 2011 11:20:11 GMT

CZR series Centrifugal AC blower/air blower

11-62A multi-vane Centrifugal Ventilator

Thu, 30 Jun 2011 11:19:49 GMT

11-62A multi-vane Centrifugal Ventilator/multi-wing ventilator

11-62A Low noise multi-vane centrifugal ventilator is designed to meet the developing demand of purifying,environment protection, and noise lowing.The fans adopts multi-purpose optimized design of noise,effieciency and other parameters,and have a good pneumatic performance.Impeller and belt pullery are all strictly dynamic balancing corrected.Therefore,it operated steadily with low noise,large air volume,less vibration and long life.

It is widely used for the kitchens in canteens,hotels,food store to ventilate and exhaust.It is useful and well-adaptable.

FY-1 axial fan with external rotor

Thu, 30 Jun 2011 11:15:11 GMT

The series of ventilators are made up of asynchronous motor operated by rotor single-phase capacitance or three-phase asynchronous motor,double-flange cylinderical body,net rack,and blades.Its features are large air volume,less vibration,low noise,steady operation etc.
This kind of fans is used in the place where large ventilation is needed.It can also be used in buildings,factories etc to exchange and clear air.

KDF5-58E Centrifugal Ventilator

Thu, 30 Jun 2011 11:18:46 GMT

KDF5-58E Centrifugal Ventilator/ ventilation fan

KDF5-58E is a centrifugal ventilator we research and produce based on the Italian RZ,German KKT and other contries' technology.After testing,the fans have used advanced technology.The fans have the features that high efficiency,large air volume,low noise,etc.It is an ideal ventilator to match the air-conditioner and purifying system.

SF axial fan

Thu, 30 Jun 2011 11:18:05 GMT

SF Axial Flow Ventilation/ Axile draft fan

motor

Thu, 30 Jun 2011 11:19:33 GMT

BZF anti-explosion Axial Flow fan

Thu, 30 Jun 2011 11:14:55 GMT

BZF anti-explosion Axial Flow fan

BZF Against explosion Axile Draft Fan/Axial Flow fan

It should be operated in the following conditions:AC 50Hz,Voltage 220V or 380V. The place where there is no heavy corrosion gas and no obvious dust.

We can add installation holders if clients request.

The fans conform with the standard mark Exd II BT4.

This series product also make additionally build peacefully according to installation shelf.

This series product conforms to the explosion-proof to symbolize ExdII BT4 request.

BZF explosion-proof Axial Flow fan

Thu, 30 Jun 2011 11:14:46 GMT

BZF explosion-proof Axial Flow fan

It should be operated in the following conditions:AC 50Hz,Voltage 220V or 380V. The place where there is no heavy corrosion gas and no obvious dust.

We can add installation holders if clients request.

The fans conform with the standard mark Exd II BT4.

Rice Winnowing Fan

Thu, 30 Jun 2011 11:19:13 GMT

Rice Winnowing Fan / ventilator

Rice Winnowing Fan is a low power and energy-saving fan with less noise. In the hope to control the source of sound and enhance the efficiency of flow force,we match the slip ring in reasonably-designed structure and asynchronous low noise motor.Therefore,it is operated steadily with low noise,high efficiency and saving-energy.

This fan is widely used in mining industry ,residential building,metallurgy,electrical place .warehouses,etc to ventilate and supply air.

DF-E double-inlet Air-conditioner Fan

Thu, 30 Jun 2011 11:19:07 GMT

DF-E double-inlet Air-conditioner Fan/ventilators

DF-E Centrifugal air-conditioner fan has the features like large air volume,low noise,compact structure,firmness and durable performance,beautiful appearance,convenience for installing and using,etc.It's suitable for all kinds of AHU,cold and warm air heating radiators,etc.It can also be used in mining industry or public room to ventilate.The conveying medium should be air and other natural but harmless gas.There is no granulated matters allowded in the air.And the dust should be no more than 150mg/m3.

DF-E/The main technical parameters

(No)	Rotation (r/min)	Power (Kw-P)	Air-flow (m³/h)	Pressure (Pa)	Noise dB(A)
2.5	1000 1300 1600	0.55-4 1.1-4 2.2-4	1650-2300 2120-3000 2600-3700	192-172 324-292 491-442	≤64 ≤68 ≤76
2.8	1000 1300 1600	0.75-4 2.2-4 3-4	1900-3400 2450-4450 3030-5450	275-241 465-407 205-617	≤64 ≤68 ≤76
3.0	900 1100 1350	1.1-4 1.5-4 3.0-4	3000-4300 3800-5200 4600-6400	360-340 550-520 820-800	≤66 ≤72 ≤75
3.55	900 1200 1400	1.5-4 4.0-1 7.5-4	5000-6650 6660-8900 7800-10400	300-275 521-490 710-660	≤71 ≤75 ≤84
4.0	800 1100 1350	1.5-4 5.5-4 11-4	3450-6000 4750-8250 5800-10125	443-434 838-821 1262-1237	≤68 ≤76 ≤83
4.5	650 850 1150	2.2-4 4.0-4 11-4	7500-12000 9600-15000 13500-19000	350-280 580-470 1030-900	≤70 ≤75 ≤83
5.0	550 800 950	4.0-4 11-4 18.5-4	10240-13750 13100-20500 15550-24400	345-312 728-668 1025-942	≤68 ≤70 ≤72
5.6	550 700 840	4.0-4 7.5-4 11-4	12810-17250 14650-21940 17913-26775	368-342 600-545 856-790	≤68 ≤70 ≤72
6.3	500 700 840	5.5-4 15-4 18.5-4	19190-25500 27650-33080 28518-37999	388-374 651-632 842-723	≤70 ≤72 ≤74
7.1	450 550 680	7.5-4 11-4 22-4	25830-30050 29200-37050 32625-45867	384-376 575-552 887-849	≤71 ≤72 ≤75
7.6	400 550 640	7.5-4 18.5-4 30-4	27560-35480 39660-48030 42253-57575	363-355 691-666 929-913	≤72 ≤74 ≤76
16	900 710 630 500 400 310	160-6 75.0-6 55.0-6 30.0-6 15.0-6 7.5-6	102810-143910 81110-113520 71971-100730 57210-79950 45696-63690 35985-50368	31756-2497 1957-1549 1538-1218 967-966 618-490 383-303
20	710 630 500 400 315 250	220-8 160-8 75.0-8 37.0-8 22.0-8 11.0-8	158410-221730 140560-196750 11560-156150 89250-124920 70284-98376 55781-78076	3069-2427 2411-1908 1514-1199 967-766 599-475 377-299

Y5-47 Boiler Centrifugal Induced Fan

Thu, 30 Jun 2011 11:19:01 GMT

Y5-47 Boiler Centrifugal Induced Fan/centrifugal induced draft fan

Y5-47 boiler centrifugal induced fan has the features such as low noise,simple structure,flexibility to adjust air volume and flow direction.It is suitable for industrial boiler in which there are smoke-exhausting set .The medium air should be in temperature of less than 250 deg C.It is driven in type C and D.It is matched with air volume adjusting set.If vibration absorber is used,clients can lay the fans on the earth directly without any earthing screw.It is easy to install and test.

C4-73 Dust-Exhausting Centrifugal Ventilator

Thu, 30 Jun 2011 11:18:32 GMT

C4-73 Dust-Exhausting Centrifugal Ventilator/ ventilation fans

C4-73 dust-exhausting centrifugal ventilators have the features that they are not easy to be dusty and they are durable.This fan is suitable to exhaust gas that includes dust,wood flour,small fiber,etc.if there are hard granulated matters in the dust,the fans should be matched with dust-exhausting set.It is also used to ventilate and exchange air.The fans are mainly made up of impeller,inlet,body,transmission part and motor.It have lett-rotated and right-rotaed types.

No	Speed	Power	Air-flow	Pressure
No	r/min	kw-p	m3/h	Pa
8D	1450	18.5-4	16156-30993	2104-1400
9D	1450	30-4	23003-32079	2668-2559
9D	1450	37-4	35052-44128	2440-1775
9D	960	11-6	15229-29216	1163-775
10D	1450	55-4	31554-60553	3301-2194
10D	960	15-6	20891-29134	1467-1379
10D	960	18.5-6	31834-40077	1315-958
10D	730	7.5-8	15886-30475	829-553
11D	1450	75-4	41999-47427	4003-3986
11D	1450	90-4	53142-80570	3943-2659
11D	960	22-6	27806-31400	1741-1734
11D	960	30-6	35183-53343	1715-1160
11D	730	11-8	21144-40562	1004-669
12D	1450	132-4	54526-76040	4777-4582
12D	1450	160-4	83088-104600	4366-3171
12D	960	37-6	36100-45677	2075-2044
12D	960	45-6	50344-69253	1990-1381
12D	730	15-8	27451-30999	1196-1191
12D	730	18.5-8	34734-52661	1178-797
14D	1450	280-4	86586-120740	6541-6272
14D	1450	315-4	131940-166100	5975-4333
14D	960	75-6	57326-64735	2831-2819
14D	960	90-6	72534-109970	2789-1883
14D	730	37-8	43591-66425	1630-1491
14D	730	45-8	72059-83624	1391-1086
16D	960	185-6	85571-164150	3709-2465
16D	730	75-8	65069-124820	2133-1420
18D	960	280-6	121830-154160	4710-4639
18D	730	132-8	92648-177730	2705-1800
20D	960	570-6	167210-320610	5837-3870
20D	960	220-8	127080-177230	3347-3211
20D	730	250-8	193660-243800	3060-2225

FC6-48 exhaust ventilator for textile industry

Thu, 30 Jun 2011 11:18:25 GMT

FC6-48 exhaust ventilator for textile industry

FC6-48-11 Exhaust ventilators are made for exhaust system in textile mills to clean cotton and induce fallen cotton.This product can also used to deliver raw cotton,wool and other matters with fiber.

The fans can be left-rotated and right rotated.If the impeller clockwise rotates from the motor side or bearing pedestal side,the fan is clockwise rotated fan.On the contrary,it is reversely rotated fan.The outlet position is showed by the angles of the fans' outlet.

There are totally 10 sizes and they are driven in type C or type A.You can choose according to your situation.

The fans are mainly made up of impeller,inlet,transmission part,pedestal,protective part,etc.The impeller is cast from 8 or 10 pcs of straight blades and spindles.They have been dynamic balancing corrected and operating steadily.The material is an alloy of aluminum so the fans are explosion-proof.The semi-open impeller enable the fans to avoid being adhesive and being blocked.

9-26 Centrifugal Fanner

Thu, 30 Jun 2011 11:18:20 GMT

9-26 Centrifugal Fanner/ Centrifugal ventilation

9-19,9-26 High Pressure Centrifugal Ventilators are widely used to convey materials and non-adhesive gas.The medium for conveying should be no more than 80 deg C.There dust or hard granulated matters should be less than 150 mg/m3.The fans are suitable for smithery industry,glass industry,ceramics industry,radio industry,electroplating industry,battery industry ,etc to ventilate through high pressure.It is also for the industries that do processing food,feed,fine ore,plastic,etc to convey materials.

FLJ small-sized centrifugal fan

Thu, 30 Jun 2011 11:18:14 GMT


离心风机系列参数
型号规格	电压	频率	相数	输入功率	电流	转速	风量	噪音	静压	电容	重量
Type	V	Hz		W	A	r/min	m3/min	dB(A)	Pa	F/V	kg
85FLJ1	110	50	1	22	0.18	2300	0.6	<50	50		0.7
85FLJ2	220	50	1	22	0.09	2200	0.6	<50	50		0.7
130FLJ1	220	50	1	85	0.4	2200	3.6	≤70	280	2.2/400	2.2
130FLJ2	110	50	1	85	0.8	2200	3.6	≤70	280	4/400	2.2
130FLJ3	380	50	3	80	0.21	2200	3.6	≤70	280		2.2
130FLJ5	220	50	1	120	0.55	2600	5.5	≤72	350	2.7/400	2.5
130FLJ7	380	50	3	145	0.35	2600	5.6	≤72	350		2.5
150FLJ3	220	50	1	180	0.8	2800	6.5	≤70	400	4/400	6.2
150FLJ4	220	50	1	100	0.46	1400	3.5	≤65	150	4/400	6.2
150FLJ5	380	50	3	300	0.8	2800	10	≤76	450		6.2
150FLJ6	380	50	3	180	0.48	1400	6.5	≤65	400		6.2
150FLJ7	220	50	1	300	1.6	2800	10	≤76	450	5/400	6.2
150FLJ8	380	50	3	300	1.6	2800	10	≤76	450		6.2
150FLJ17	220	50	1	220	1.05	2600	9	≤72	420	5/400

8-09 Centrifugal Ventilator

Thu, 30 Jun 2011 11:17:46 GMT

8-09 Centrifugal Ventilator/ ventilation fan

8-09 and 9-12 Centrifugal fans are specially produced for cupola furnace.It meets the blowing perfomance demand of cupola furnace whose melting rate is 1-7L/h.It is also used to blow for all kinds of furnaces and smithery furnace.It can also be used to convey non-corrosive,unnatural and non-adhesive gas.The medium should be less than 80 deg C and there should be dust or hard granulated matters no more than 150mg/m3.

8-09 Cupola-used High Pressure Centrifugal Fanner complies with requirements of blast function of cupolas with 1-7L/H melting rate.The fanner is also used to blast in all kinds of furnaces and refining stoves and convey air and other gas with non-corrosiveness,unnatural,non-adhesive matters.The temperature of the transporting medium does not surpass 80 deg C and the including dust and flinty granules are not bigger than 150mg/m3

FZY Axial Flow Ventilator with External Rotor Motor

Thu, 30 Jun 2011 11:14:27 GMT

FZY axial-flow with External Rotor Motor / axile fan

This kind of fans is used in the place where large ventilation is needed.It can also be used in buildings,factories etc to exchange and clear air.

Gz drying fan

Thu, 30 Jun 2011 11:17:55 GMT

Name:Gz series drying fan / air blower

Gz series are made of aluminum alloy material.It is light.When be operated,it produces less noise and large air volume.

This kind of fans are used to support the machinery and equipment.Its adjustable inlet well meets the demand of pressurizing and ventilation.

4-68 Centrifugal Ventilator

Thu, 30 Jun 2011 11:17:40 GMT

4-68 Centrifugal ventilator / Centrifugal exhaust fan

4-68 Centrifugal ventilators can be used in common plants and large-scaled building to exchange air.It can both induce air and exhaust gas.The medium should be air and other unnatural but harmless,non-corrosive to steel gas whose temperature should not surpass 80 deg C.There should be no adhesive matters.The dust or hard granulated matters in air should be less than 150mg/m3.

4-68 Centrifugal exhaust fan

Thu, 30 Jun 2011 11:17:35 GMT

4-68 Centrifugal exhaust fan / centrifugal ventilator

4-2x79E centrifugal ventilator

Thu, 30 Jun 2011 11:17:26 GMT

4-2x79E centrifugal ventilator / ventilation fan

It is widely used in mining industry,large-scaled building,hotel,restaurants etc to ventilate and exhaust smoke.

4-72 Centrifugal Ventilator

Thu, 30 Jun 2011 11:16:58 GMT

4-72 Centrifugal ventilator/ ventilation fanner

4-72 Centrifugal Ventilator can convey air and other unnatural but harmless to steel,non-corrosive gas.No adhesive matters are allowded in the air.The dust and hard granulated matters are less than 150mg/m3.The ambient temperature is less than 80 deg C.The fans have a good pneumatic performance.Their features are steady operation,less vibration,high efficiency,long life..There are totally 4 driving types:A,B,C and D type.

This kind of fans are widely used in mining industry,high building,hotels etc to ventilate and air exchange.

6-30 Dust-Exhausting Centrifugal Ventilator

Thu, 30 Jun 2011 11:16:28 GMT

6-30 Dust-Exhausting Centrifugal Ventilator /ventilation fan

The conveying medium of 6-30 centrifugal ventilators is air and other non-corrosive,unnatural,non-adhesive gas..The ambient temperature should not surpass 80 deg C.The fan has the features such as high pressure,small air volume,etc.It is used to convey when prodcessing with the foodstuff and cotton.

This medium elected by 6-30 Centrifugal Fanner is air and other gas with non-corrosiveness,non-selfignition and non adhesive matters within temperature of 80 deg C.The kind of fanner has features of high pressure and low flux.which is suitable to wind power transportation of process of foodstuff and cotton.

HTF fire fighting high-temperature exhaust fan

Thu, 30 Jun 2011 11:17:11 GMT

HTF fire fighting high-temperature exhaust fan / ventilation fan

HTF fire fighting high temperature exhaust fan is a new product through optimized design.It has the features such as high efficiency and smooth curved surface,etc.It's good for saving energy.The fans are driven directly by motor.It can be driven at single speed to ventilate and exhaust in high temperature area when fire fighting if the residential buildings need.

It is widely used to residential buildings,drying oven,basement parking lot,subway etc.

HL3-2A mixed flow and low noise boiler fan

Thu, 30 Jun 2011 11:17:05 GMT

HL3-2A mixed flow and low noise boiler fan/flow-mixed fan

HL3-2A/PYHL-14 ventilators ,designed according to "Quasi-ternary" flow theory,are made up of linear canister,conical hub,twist blades.Its inlet is matched with slip ring or arc noise elimination equipment.When the size is same,Its pressure is higher than axial-flow ventilator's,and its air volume is larger than centrifugal fan's.Its features are high efficiency,compact structure,low noise,small volume.convenience for installation,etc.

This kind of fans are widely used in hotels,restaurants,stores,office buildings,gymnasium,etc to ventilate.It's also used in pipeline and mining industry to increase the pressure and exchange air.

4-72 anti-explosion Centrifugal Ventilator

Thu, 30 Jun 2011 11:15:43 GMT

4-72 anti-explosion Centrifugal ventilator/ ventilation fanner

This kind of fans are widely used in mining industry,high building,hotels etc to ventilate and air exchange.etc.

YL series double-value capacitor asynchronous motor

Thu, 30 Jun 2011 11:16:51 GMT

YL series double-value capacitor asynchronous motoris designed and manufactured in accordance with national standard,features good starting and running performance,low noise,small size,light weight and convenient maintenance etc.it may be used entensively for air compressor,water pump,blower fan,refrigeration,medical apparatus and small sized machinery etc.is especially suitable for conditions where only single-phwer supply is available.

T35-11 Axial-flow Ventilator

Thu, 30 Jun 2011 11:22:08 GMT

T35-11 Axial-Flow Ventilator / Axile draft fan

Technical Parameter：

No	Power	Voltage	Rotation	Air-volume	Pressure
	(KW-P)	(V)	(r/min)	(m3/h)	(Pa)
2.8	0.09-4	220	1450	1464	48
2.8	0.09-4	380	1450	1464	48
2.8	0.25-2	220	2900	2921	186
2.8	0.25-2	380	2900	2921	186
3.15	0.12-4	220	1450	2072	59
3.15	0.12-4	380	1450	2072	59
3.15	0.37-2	220	2900	4141	237
3.15	0.37-2	380	2900	4141	237
3.55	0.18-4	220	1450	2977	94
3.55	0.18-4	380	1450	25977	94
3.55	0.75-2	220	2900	5965	300
3.55	0.75-2	380	2900	5965	300
4	0.25-4	380	1450	4263	95
4	1.5-2	220	2900	8512	380
4	1.1-2	380	2900	8513	380
4.5	0.37-4	220	1450	6070	121
4.5	0.37-4	380	1450	6070	121
5	0.55-4	220	1450	8327	149
5	0.55-4	380	1450	8327	149
5.6	1.1-4	380	1450	11682	186
5.6	0.37-6	380	960	7724	81
6.3	1.5-4	380	1450	16639	236
6.3	0.75-6	380	960	11016	104
6.3	2.2-4	380	1450	18225	294
7.1	3-4	380	1450	23815	300
7.1	0.75-6	380	960	15766	131
8	5.5-4	380	1450	34073	380
8	1.5-6	380	960	22556	167
9	3-6	380	960	32119	211
10	4-6	380	960	44062	261
11.2	7.5-6	380	960	61091	337

Y6-30 Boiler centrifugal and Induced draft fan

Thu, 30 Jun 2011 11:16:38 GMT

Y6-30 Boiler centrifugal and Induced draft fan/ ventilation fan

This kind of ventilations are used for boiler.Its features are high efficiency,low noise,etc.The medium should be non-corrosive and non-adhesive gas with temperature less than 250 deg C.

5-29 High Pressure Centrifugal ventilator

Thu, 30 Jun 2011 11:15:28 GMT

5-29 High Pressure Centrifugal ventilator/ ventilation fanner

5-29 High pressure centrifugal ventilators are used to supply and inducing air.It is also used to convey non-corrosive,unnatural and non-adhesive gas.It is specially used to convey when processing cashmere.Sometimes we use it to blow for cupola.Pay attention,the medium temperature should not surpass 80 deg C,and the dust in air should not surpass 150mg/m3.Its features are high efficiency,saving energy,etc.

Model 5-29 High Pressure Centrifugal Fanner is used transport,absorb air and transport other gas with non-corrosiveness,non self-ignition and non adhesive matters,which especially suits to process and transportation of cotton velvet.It is also used in blowing and refining of towering stoves.The temperature of the conveying medium does not surpass 80 deg C and dust content does not surpass 150 mg/m3. It has features of high efficiency and low consumption.

BYZ double ventilation high temperature resistant and damp proof axial fan

Thu, 30 Jun 2011 11:19:58 GMT

BYZ double ventilation high temperature resistant and damp proof axial fan / axiel draft fan

Model BYZ is a new generation of Low Noise Axial Fan.It adapts optimized aerodynamics design and advanced processing technology.The structure is reasonable and firm,which ensures the fan to be safe and practical.It has many features such as large air volume,high wind pressure,low noise,less power consumption,lightness,etc.It is bidirectionally ventilating without any difference in air volume.You can adjust the angle of the blades if needed.

There can be 11 specifications according to the different diameters of the impeller.Each fan can have 8 to 14 pieces of blades and six angles from 15 deg to 40 deg are available.The largest air volume can reach 70000 m3/hr.

The motor of BYZ axial fan is high temperature resistant,so the fan can be operated in the place where the ambient temperature is less than 150 deg C. The impeller made of an alloy of magnesium and aluminum have explosion-proof function.Therefore if it is matched with explosion-proof motor,the fan can be used to convey the gas that are easy to catch fire.BYZ axial fan is the best choice for drying kilns to ventilate and heat exchange.

C6-48 Dust-Exhausting Centrifugal fan

Thu, 30 Jun 2011 11:14:02 GMT

C6-48 Dust-Exhausting Centrifugal fan

C6-48 Dust-exhausting Centrifugal Fan specially made to exhaust dust.This series of fans are not easy to get dusty and they are durable.It is suitable to convey the gas including dust,wood flour,small fiber,etc.If there is hard granulated matters in the air,the fans should be matched with dust-exhausting set.It can also be used for common ventilation system.

C6-48A The main technical paramenters

(No)	Rotation (r/min)	Power (Kw-P)	Air-volume (m³/h)	Pressure (Pa)
3.15	2900	2.2-2	1369-3060	1587-1163
3.15	1450	0.55-4	684-1530	397-291
4	2900	5.5-2	2748-6374	2594-1859
4	1450	1.1-4	2582-3187	553-465
5	1450	3-4	4401-6252	918-724
5	960	0.75-6	1705-4139	449-317
6.3	1450	7.5-4	10091-12505	1369-1150
6.3	960	2.2-6	3411-8279	711-504

C6-48C The main technical paramenters

(No)	Rotation (r/min)	Power (Kw-P)	Air-volume (m³/h)	Presuure (Pa)
3.15	1600	0.75-2	755-1688	483-354
	1800	0.75-2	850-1899	611-448
	2000	0.75-2	944-2110	755-553
	2240	1.1-2	1057-2363	948-694
	2500	1.1-2	1180-1909	1181-1070
	2500	1.5-2	2152-2637	1015-865
	2800	1.5-2	1322-2138	1483-1344
	2800	2.2-2	2410-2954	1274-1086
	3150	2.2-2	1487-2711	1880-1615
	3150	3-2	3017-3323	1507-1376

C6-48C The main technical paramenters

(No)	Rotation (r/min)	Power (Kw-P)	Air-volume (m³/h)	Pressure (Pa)
4	1250	0.75-2	1184-2748	481-345
	1400	0.75-2	1326-3077	603-433
	1600	1.1-2	1516-2850	789-672
	1600	1.5-2	3183-3517	624-565
	1800	1.5-2	1705-3957	999-716
	2000	2.2-2	1895-4396	1234-884
	2240	2.2-2	2122-2589	1550-1505
	2240	3-2	3056-4924	1451-1110
	2500	3-2	2369-3411	1933-1810
	2500	4-2	3932-5495	1737-1384
5	1000	0.75-2	1776-3035	486-436
	1000	1.1-2	3479-4312	410-344
	1250	1.5-2	2221-4349	760-641
	1250	2.2-2	4927-5390	592-538
	1400	2.2-2	2487-6036	954-675
	1600	3-2	2842-6899	1247-882
	1800	4-2	3798-6262	1580-1332
	1800	5.5-2	7095-7761	1230-1118
	2000	5.5-2	3553-6958	1953-1647
	2000	7.5-2	7883-8623	1521-1381
	800	1.1-4	2843-4116	494-464

C6-48C The main technical paramenters

(No)	Rotation (r/min)	Power (Kw-P)	Air-volume (m³/h)	Pressure (Pa)
8	630	2.2-4	4584-11126	494-350
	710	3-4	5166-12539	627-444
	800	3-4	5821-8429	797-749
	800	3-4	9944-14128	716-564
	900	5.5-4	6549-12824	1009-851
	900	7.5-4	14530-15894	786-714
	1000	7.5-4	7276-17660	1247-882
	1120	7.5-4	8150-9763	1566-1526
	1120	11-4	11799-19779	1472-1108
	1250	15-4	9096-22075	1953-1381
10	500	4-4	7402-18208	508-344
	630	5.5-4	9372-18373	807-659
	710	7.5-4	10510-20706	1026-838
	710	11-4	23334-25856	769-695
	800	11-4	11843-23331	1034-1065
	800	15-4	26291-29134	978-882
	900	15-4	13323-23049	1653-1445
	900	18.5-4	26247-32776	1349-1118
	1000	18.5-4	14804-22057	2043-1900
	1000	22-4	25610-36417	1787-1381
	400	4-4	11565-20008	508-445
	400	5.5-4	22784-28451	415-344
	500	7.5-4	14457-25010	795-695
		11-4	28480-35564	649-538
		15-4	18215-31513

Y three phase induction motor

Thu, 30 Jun 2011 11:16:03 GMT

Application:General purpose including cutting machine,pumps,fans,conveyors.machine tools of farm duty process.

Feature:the insulation class is B,protective is IP44.

Circumstance for use:the altitude not exceeding 1000m above sea level.the ambient temperature subject to seasonal bot not exceeding +40 and not less than -15.

QZA Axial-flow Ventilator

Thu, 30 Jun 2011 11:14:21 GMT

QZA Axial-flow Ventilator/ axile fan

QZA ventilators are usually used in factories,warehouses,offices,and residential buildings to ventilate and enhance heat dissipation.If its body is removed,the fans can be used freely.It can also be intervally installed in a long pipeline to increase the wind pressure in the pipe.

QZA are mainly made up of impeller and body.

The impeller is composed with blades made of steel sheet and big hub.Its pressure is higher than axial-flow ventilator's.The blades can be required to be welded with the hub in a proper angle.

The body is made up of ventilation canister and holder,all of which are made of steel sheet and sectional material.There is a gap between the straight cylindrical ventilation canister and impeller.

The main technical parameter：

	Power	Air-volume	Pressure
(No)	(Kw-P)	(m³/h)	(Pa)
5	3Kw-2P	10000-6800	510-700
6	5.5Kp-2P	16000-13000	550-760
7	7.5Kw-4P	25000-18000	610-720
8	7.5Kw-4P	32000-28000	582-630
9	11Kw-4P	34000-28000	562-660
10	11Kw-4P	46000-36000	580-740
11	15Kw-4P	52000-49600	610-760
12	18.5Kw-4P	63000-58000	600-730
13	18.5Kw-6P	75000-56000	620-750
14	22Kw-6P	11000-7600	620-780

4-72-12 movable air blower for grain depot

Thu, 30 Jun 2011 11:15:54 GMT

4-72-12 movable air blower for grain depot/ ventilation fan

4-72-12 Movable air blower is designed specially for grain depot to lower temperature.The main part of the blower is 4-72 ventilator with high efficiency and low noise.The secondary part is a handcart.So the fans are movable.There are totally 10 specifications from No.2.8 to No.12.The driven type is C type.We can specially made according to clients' requirements.

Y6-41 Centrifugal Induced draft Fan

Thu, 30 Jun 2011 11:15:49 GMT

Ventilator of this is series is constituted of single phase capacitance forced asynchronous motor with external rotor or three phase asynchronous motor,double-flange cylinder shell,network frame and blade.It boasts the characteristics of strong wind,feeble vibration,low noise and reliable performance,etc.This ventilator is mainly used for ventilation and heat elimination in industries ancluding ground servomechanism,large scale electronic equipment,medical treatment facilities,computer,office automation,welding machine where strong windies needed.It is can also work for ventilation air exchanging and purification on buildings and factories.

Y6-41 Centrifugal Induced Draft Fan/ Induced centrifugal fan

This kind of products are for all kinds of industrial boilers with evaporation amount 0.5-10t/h.It can be left-rotated and right-rotated.The outlet can be adjusted at 0 deg,90deg,180deg and 270deg four angles.The fans can be used to match with industrial boiler.

The fans are driven in C and D types.It is matched with governor valve,base and vibration reduction pad.

FZY Flow Ventilator with External Rotor Motor and Low Noise and Eneray Saving Axle

Fri, 10 May 2013 10:01:09 GMT

Classification of products:Pipe style,fixed style,station style

Operation environment:

Temperature of the environment: -40℃-55℃

Height above sea level:55Kpa(2500m)

Relative humidity:90%--95%

Model instruction

XXX:Ventilator model (inner diameter of cylinder,mm)

FZY:Name Code(F-ventilator,Z-axis flow,Y-cylider)

D:380V E:220V 2:Two poles 4:Four poles

Performance parameter table of FZY energy saving Flow Ventilator series with external rotor motor and energy saving axl.

No	Frequency	Voltage	Power	Rotation	Air-flow	Noise
No	HZ	V	W	R/MIN	M³/H	dB(A)
FZY-2E200	50	220	75	2400	1050	65
FZY-2D200	50	380	75	2400	1050	65
FZY-4E200	50	220	55	1450	510	53
FZY-4D200	50	380	55	1450	510	53
FZY-2E250	50	220	185	2300	2100	69
FZY-2D250	50	380	185	2300	2100	69
FZY-4E250	50	220	70	1450	1300	55
FZY-4D250	50	380	70	1450	1300	55
FZY-2E300	50	220	230	2300	3000	69
FZY-2D300	50	380	230	2300	3000	69
FZY-4E300	50	220	95	1450	2200	61
FZY-4D300	50	380	95	1450	2200	61
FZY-4E350	50	220	130	1450	3500	65
FZY-4D350	50	380	130	1450	3500	65
FZY-4E400	50	220	185	1450	5300	68
FZY-4D400	50	380	185	1450	5300	68
FZY-4E450	50	220	250	1450	6150	73
FZY-4D450	50	380	250	1450	6150	73
FZY-4E500	50	220	380	1450	8500	74
FZY-4D500	50	380	380	1450	8500	74
FZY-4E600	50	220	850	1450	14800	83
FZY-4D600	50	380	850	1450	14800	83

G4-73 Boiler Centrifugal Fanner and Induced Draft fan

Thu, 30 Jun 2011 11:14:33 GMT

G4-73 Boiler Centrifugal Fanner and induced draft fan

G4-73 and Y4-73 Boiler centrifugal and induced fans are suitable for the ventilation and induced draft system of thermal power plants where the evaporation amount should be 2-670 t/h.G4-73 can be used for mining industry to ventilate.It can also be used to common ventilation.The medium should be air ,and its temperature should not surpass 80 degC.Induced draft fans exhaust smoke,and its temperature should be less than 250 deg C.

G4-73 The main technical paramenters

(No)	Rotation (r/min)	Power (Kw-P)	Air-volume (m³/h)	Pressure (Pa)
8	1450	18.5-4	16156-30993	2104-1400
9	1450	30-4	23003-32079	2668-2559
	1450	37-4	35052-44128	2440-1775
	960	11-6	15229-29216	1163-775
10	1450	55-4	31554-60533	3301-2194
	960	15-6	20891-29134	1437-1379
	960	18.5-6	31834-40077	1315-958
	730	7.5-8	15886-30475	829-553
11	1450	75-4	41999-47427	4003-3986
	1450	90-4	53142-80570	3943-2659
	960	22-6	27806-31400	1741-1734
	960	30-6	35183-53343	1715-1160
	730	11-8	21144-40562	1004-669
12	1450	132-4	54526-76040	4777-4582
	1450	160-4	83088-104600	4366-3171
	960	37-6	36100-45677	2075-2044
	960	45-6	50344-69253	1990-1381
	730	15-8	27451-30999	1196-1191
	730	18.5-8	34734-52661	1178-797
14	1450	280-4	86586-120740	6541-6272
	1450	315-4	131940-166100	5975-4333
	960	75-6	57326-64735	2831-2819
	960	90-6	72534-109970	2789-1883
	730	37-8	43591-66425	1630-1491
	730	45-8	72059-83624	1391-1086

G4-73 The main technical paramenters

(No)	Rotation (r/min)	Power (Kw-P)	Air-volume (m³/h)	Pressure (Pa)
16	960	185-6	85571-164150	3709-2465
16	730	75-8	65069-124820	2133-1420
18	960	280-6	121830-154160	4710-4639
18	730	132-8	92648-177730	2705-1800
20	960	570-6	167210-320610	5837-3870
	730	220-8	127080-177230	3347-3211
	730	250-8	193660-243800	3060-2225

Y4-73 The main technical paramenters

(No)	Rotation (r/min)	Power (Kw-P)	Air-volume (m³/h)	Pressure (Pa)
8	1450	11-4	15156-182440	1303-1298
8	1450	15-4	20442-30993	1284-868
9	1450	22-4	23003-32079	1651-1584
	1450	30-4	35052-44128	1511-1100
	960	7.5-6	15229-29219	721-481
10	1450	37-4	31554-44004	2041-1959
	1450	45-4	48083-60533	1867-1359
	960	11-6	20891-40077	891-594
	730	5.5-8	15886-30475	515-343
11	1450	55-4	41999-47427	2474-2463
	1450	75-4	53142-80570	2437-1646
	960	18.5-6	27806-53343	1079-719
	960	7.5-8	21144-29487	623-598
	730	11-8	32220-40562	570-415

Y4-73 The main technical paramenters

(No)	Rotation (r/min)	Power (Kw-P)	Air-volume (m³/h)	Pressure (Pa)
12	1450	90-4	54526-68992	2949-2905
	1450	110-4	77040-104600	2929-1961
	960	30-6	36100-69253	1285-856
	730	11-8	27451-34732	742-731
	730	15-8	38282-52661	712-495
14	1450	185-4	86586-109550	4029-3968
	1450	220-4	12074-166100	3864-2676
	960	55-6	57326-72534	1752-1726
	960	75-6	79944-109970	1681-1167
	730	22-8	43591-49225	1010-1006
	730	30-8	55156-83624	995-674
	960	110-6	85571-96631	2293-2283
	960	132-6	108270-164150	2258-1526
	730	45-8	65069-73480	1321-1316
	730	55-8	82333-124820	1302-880
	580	45-10	51699-99178	833-555
18	960	200-6	121830-169910	2908-2790
	960	220-6	185650-233730	2659-1934
	730	90-8	92648-129200	1674-1606
	730	110-8	141170-177730	1532-1115
	580	45-10	73610-102650	1055-1012
	580	55-10	112160-141210	965-703
20	960	380-6	167130-320610	3598-2392
	730	132-8	127080-143510	2070-2061
	730	160-8	160800-243800

DF Low Noise Centrifugal air blower

Thu, 30 Jun 2011 11:18:53 GMT

DF low noise centrifugal air blower/ventilation fan

DF centrifugal fan is with excellent technical design.The material is firm and the performance is steady.It has obvious function to lower noise.The fans have features such as low noise,high efficiency,long life,convenience for installation,etc.It is widely used in telecommunications industry,power industry,electrification of industry,electronics industry,geological industry,mining industry,ship industry,papermaking industry,etc.It is specially used for plasitc machine,printing machine,drying machine,etc to ventilate and control temperature.

The main technical paramenters

(No)	Rotation (r/min)	Power (Kw-P)	Air-flow (m³/h)	Pressure (Pa)	Noise dB(A)
DF-1	2800	0.09-2	240	330	≤72
DF-1	2800	0.12-2	305	390	≤72
DF-2	2800	0.18-2	405	450	≤75
DF-3	2800	0.25-2	505	860	≤75
DF-4	2800	0.37-2	660	850	≤76
DF-5	2800	0.55-2	850	1020	≤76
DF-6	2800	0.75-2	1200	1210	≤80
DF-7	2800	1.1-2	1600	1530	≤82

JS square axial fan

Wed, 10 Oct 2012 13:22:48 GMT

This kind of fans are widely used in place ,such as mining industry,warehouses,offices,residents,etc where ventilation is needed.

Technical Parameter：

No	Blade diameter	Blade rotation	Motor rotation	Air-flow	Noise	Power	Voltage
	mm	r/min	r/min	m³/h	dB(A）	kw	v
JS620	500		1400	16500	65	0.37	380
JS800	710	520	1400	21000	70	0.37	380
JS1000	900	520	1400	28000	70	0.55	380
JS1100	1000	480	1400	31000	70	0.75	380
JS1100A	1000	480	1400	31000	70	0.75	380
JS1380	1250	420	1400	42000	70	1.1	380
JS1380A	1250	420	1400	42000	70	1.1	380
JS1530	1400	400	1400	50000	70	1.5	380
JS1530A	1400	400	1400	50000	70	1.5	380

11-62E low noise Multi-wing Centrifugal Ventilator

Thu, 30 Jun 2011 11:17:20 GMT

11-62E low noise Multi-wing Centrifugal Ventilator/ventilation fan

11-62E low noise multi-wing centrifugal fan is a product derived from 11-62A.It is driven by belt,and its air volume and pressure can be adjusted.Therefore clients have more choice of paramters.This kind of fans have features of large air volume,low noise,steady operation.It's best choice for restaurant and hotels to exhaust.

11-62E the main technical paramenters

(No)	Rotation (r/min)	Power (Kw-P)	Air-volume (m³/h)	Pressure (Pa)	Noise dB(A)
3.5	960	1.1-4	3200-6000	450-320	≤63
3.5	1100	2.2-4	3700-7000	560-410	≤65
4	800	1.5-4	3500-8000	550-320	≤62
4	1400	2.2-4	4000-10000	620-380	≤64
4.5	700	1.1-4	5400-6500	490-380	≤62
4.5	960	3.0-6	8600-11000	700-570	≤64
5	600	3.0-4	5400-10000	550-420	≤67
	700	4.0-4	6800-14500	750-560	≤68
	840	5.5-4	8000-14500	850-640	≤70
5.6	550	3.0-4	4920-8620	359-342	≤68
	650	4.0-4	10500-13500	660-580	≤69
	840	7.5-4	12000-16500	770-600	≤72
6.3	500	4.0-4	11500-17500	640-520	≤70
	550	5.5-4	13000-18500	700-540	≤71
	630	7.5-4	15000-21500	850-650	≤72
7.1	500	5.5-4	14000-19800	670-500	≤72
	550	7.5-4	15000-24000	750-580	≤73
	680	11-4	175000-26000	800-600	≤75
7.6	450	5.5-4	11920-19530	452-446	≤72
	550	11-4	19000-28500	830-700	≤74
	640	15-4	16560-28780

KT40 axile fan

Thu, 30 Jun 2011 11:21:54 GMT

KT40 Axile fan / axial-flow ventilators

T40、KT40、FKT40 The main technical parameter

(No)	Rotation	Power	Air-volume	Pressure	Noise
	(r/min)	(Kw-P)	(m3/h)	(Pa)	dB(A)
2.5	2900	0.18-2	2010	152	71
2.5	1450	0.09-4	1010	38	56
3	2900	0.55-2	3840	219	76
3	1450	0.12-4	1740	55	61
3.55	2900	0.75-2	5520	298	80
3.55	1450	0.12-4	2760	75	65
4	1900	1.5-2	8240	390	84
4	1450	0.25-4	4120	97	69
5	1450	0.75-4	8050	152	75
5	960	0.25-6	5332	66	66
6	1450	1.5-4	13900	219	80
6	960	0.75-6	9200	96	72
7	1450	3.0-4	22100	300	81
7	960	0.75-6	14600	131	75
8	1450	5.5-4	33000	389	83
8	960	1.5-6	21800	171	79
9	960	3-6	31100	216	80
10	960	5.5-6	42700	267	82

electric blower

Thu, 30 Jun 2011 11:15:17 GMT

Electric Blower (Aluminum Body) ,in which there is capacitance starter,has features such as large air volume,high wind pressure,saving energy,lightness and beautiful appearance.It can help combusting and is applicable to families,restaurants,small-scaled boiler,blast furnaces,etc.It is also used in common places to lower temperature.

The Main Technical Parameter

SIZE	VOLT	WATT	CYCLES	AMP	R.P.M
2"	220V	150W	50/60	1.0A	3000/3600
2-1/2"	220V	260W	50/60	1.6A	3000/3600
3"	220V	370W	50/60	2.0A	3000/3600

CTF Portable Energy-saving Low Noise Axial Fan

Wed, 10 Oct 2012 08:37:55 GMT

BYZ T35 Series Dual Low Noise Axial Fan is a new generation of low-noise ventilation products. The machine adopts the principle of aerodynamics design and optimization of advanced manufacture technology, reasonable structure, strong, safe and practical, with a large amount of wind, air pressure, low noise , low power consumption, light weight and at the same installation location, it can achieve positive and negative bi-directional ventilating, air outlet blade angle in accordance with requirements of the advantages of making the appropriate adjustment BYZ T35 impeller type axial flow fan according to different diameters, with 13 model specification, that 4,4.5,5,5.6,6,6.3,7.1,8,9,10,11.2, the number of each blade is 8-14 pieces , blade angles are 15-40 degrees six kinds etc.Compared with the now widespread use of domestic axial, Air volume is increased by 42%, Wind pressure increased by 30%, Noise (A sound level) reduce the 10-10dB (a), Total pressure efficiency up to 82.3%. The maximum amount of Air-volume up to 140000m³/h.

BYZ（CTF Portable type） equipped with low noise axial fan motor heat (insulation class F, protection grade IP54), high temperature baking cabinet, in high-humidity environment below 120 ℃ long run. The impeller is made by the low-magnesium alloy, with explosion-proof performance, therefore supporting the flameproof motor, can transport flammable gas. BYZ fan is the best wood drying kiln ventilation fan.

BYZ T35 （CTF Portable type）Low Noise Axial Fan is widely applicable in factories, basements, shipyards, farms, grain storage, chemical, Pharmaceutical, tobacco, tunnel, automobile manufacturing, auto repair factory, logistics, hotels, hotel kitchen, playground, shopping malls, bars, kiln, tile factory, steel factory, mining, plastic machinery, paper mills and other ventilation

CTF Portable Energy-saving Low Noise Axial Fan "R" is single-phase
Type/Power	Frequency	Voltage	Rotation	Air-flow	Pressure
（kW）	(Hz)	（V）	（r/min）	（m3/h）	（Pa）
CTF-2.5-2-0.25kW	50	36	2800	2100	215
CTF-3-2-0.37kW	50	36	2800	3000	230
CTF-4-4-0.55kW	50	36	1400	5870	149

CTF Type36V Safe Voltage Portable Marine Ventilator "R" is single-phase
(No)	Rotation	Air-flow	Power	Pressure	Noise
	（r/min）	（m3/h）	（kW）	（Pa）	dB(A)
CTF2-2	2800	1300	0.12	140	62
CTF2-2R	2800	1300	0.12	140	62
CTF2-4	1450	600	0.06	20	57
CTF2-4R	1450	600	0.06	20	57
CTF2.5-2	2800	2100	0.25	215	65
CTF2.5-2R	2800	2100	0.25	215	65
CTF2.5-4	1450	1000	0.09	35	59
CTF2.5-4R	1450	1000	0.09	35	59
CTF3-2	2800	3000	0.37	230	68
CTF3-2R	2800	3000	0.37	230	68
CTF3-4	1450	2000	0.12	59	61
CTF3-4R	1450	2000	0.12	59	61
CTF4-4	1450	5870	0.55	149	72
CTF4-2	2800	11000	1.5	270	75
CTF4-2R	2800	11000	1.5	270	75
CTF5-4	1450	10000	0.75	200	74
CTF5-4R	1450	10000	0.75	200	74
CTF5-2	2800	15000	1.8	300	79
CTF5-2R	2800	15000	1.8	300	79

BYZ T35 Series Dual Low Noise Axial Fan

Tue, 09 Oct 2012 20:06:35 GMT

BYZ equipped with low noise axial fan motor heat (insulation class F, protection grade IP54), high temperature baking cabinet, in high-humidity environment below 120 ℃ long run. The impeller is made by the low-magnesium alloy, with explosion-proof performance, therefore supporting the flameproof motor, can transport flammable gas. BYZ fan is the best wood drying kiln ventilation fan.

BYZ T35 Series Dual Low Noise Axial Fan is widely applicable in factories, basements, shipyards, farms, grain storage, chemical, Pharmaceutical, tobacco, tunnel, automobile manufacturing, auto repair factory, logistics, hotels, hotel kitchen, playground, shopping malls, bars, kiln, tile factory, steel factory, mining, plastic machinery, paper mills and other ventilation

Model	Rotation	Angle	Conditions	Air-volume	Total Pressure	Static pressure	Power	Noise
	r/min	°		m³/h	pa	pa	kw	dB（A）
280	2900	25	1	2315	200	135	0.18	60
280	2900	25	2	2547	191	112	0.18	60
280	2900	30	1	2845	235	124	0.25	61
280	2900	30	2	3056	226	100	0.25	61
280	2900	35	1	3325	263	109	0.25	62
280	2900	35	2	3542	254	81	0.25	62
280	2900	40	1	3854	294	93	0.37	63
280	2900	40	2	4056	286	66	0.37	63
280	1450	25	1	1158	50	34	0.04	56
280	1450	25	2	1274	48	28	0.04	56
280	1450	30	1	1423	59	31	0.04	57
280	1450	30	2	1528	57	25	0.04	57
280	1450	35	1	1663	66	27	0.04	58
280	1450	35	2	1771	64	20	0.04	58
280	1450	40	1	1927	74	23	0.06	59
280	1450	40	2	2028	72	17	0.06	59
315	2900	25	1	3742	287	181	0.37	61
315	2900	25	2	3947	275	157	0.37	61
315	2900	30	1	4258	307	169	0.55	62
315	2900	30	2	4468	297	145	0.55	62
315	2900	35	1	4752	328	157	0.55	63
315	2900	35	2	4957	316	129	0.55	63
315	2900	40	1	5264	346	136	0.55	64
315	2900	40	2	5547	335	101	0.55	64
315	1450	25	1	1871	72	45	0.06	57
315	1450	25	2	1974	69	39	0.06	57
315	1450	30	1	2129	77	42	0.06	58
315	1450	30	2	2234	74	36	0.06	58
315	1450	35	1	2376	82	39	0.06	59
315	1450	35	2	2479	79	32	0.06	59
315	1450	40	1	2632	87	34	0.09	60
315	1450	40	2	2774	84	25	0.09	60
355	2900	25	1	5468	311	170	0.55	62
355	2900	25	2	5796	298	140	0.55	62
355	2900	30	1	6016	335	165	0.75	63
355	2900	30	2	6348	322	132	0.75	63
355	2900	35	1	6648	366	158	0.75	64
355	2900	35	2	6942	354	127	0.75	64
355	2900	40	1	7254	396	148	1.1	65
355	2900	40	2	6942	383	117	1.1	65
355	1450	25	1	2734	78	43	0.09	58
355	1450	25	2	2898	75	35	0.09	58
355	1450	30	1	3008	84	41	0.09	59
355	1450	30	2	3174	81	33	0.09	59
355	1450	35	1	3324	92	40	0.12	60
355	1450	35	2	3471	89	32	0.12	60
355	1450	40	1	3627	99	37	0.12	61
355	1450	40	2	3758	96	29	0.12	61
Model	Rotation	Angle	Conditions	Air-volume	Total Pressure	Static pressure	Power	Noise
	r/min	°		m³/h	pa	pa	kw	dB（A）
400	2900	25	1	7326	433	276	1.1	63
400	2900	25	2	7765	411	234	1.1	63
400	2900	30	1	8154	461	266	1.1	64
400	2900	30	2	8546	442	228	1.1	64
400	2900	35	1	8952	496	261	1.5	65
400	2900	35	2	9312	476	222	1.5	65
400	2900	40	1	9950	523	233	1.5	66
400	2900	40	2	10576	500	172	1.5	66
400	1450	25	1	3663	108	69	0.12	59
400	1450	25	2	3883	103	59	0.12	59
400	1450	30	1	4077	115	67	0.18	60
400	1450	30	2	4273	111	57	0.18	60
400	1450	35	1	4476	124	65	0.18	61
400	1450	35	2	4656	119	56	0.18	61
400	1450	40	1	4975	131	58	0.25	62
400	1450	40	2	5288	125	43	0.25	62
450	1450	25	1	5656	176	117	0.37	65
450	1450	25	2	6052	165	98	0.37	65
450	1450	30	1	6499	192	115	0.55	66
450	1450	30	2	6885	181	94	0.55	66
450	1450	35	1	7256	215	119	0.55	67
450	1450	35	2	7652	206	99	0.55	67
450	1450	40	1	8025	235	117	0.75	68
450	1450	40	2	8452	223	92	0.75	68
450	960	25	1	3771	78	52	0.12	60
450	960	25	2	4035	73	44	0.12	60
450	960	30	1	4333	85	51	0.12	61
450	960	30	2	4590	80	42	0.12	61
450	960	35	1	4837	96	53	0.18	62
450	960	35	2	5101	92	44	0.18	62
450	960	40	1	5350	104	52	0.18	63
450	960	40	2	5635	99	41	0.18	63
500	1450	25	1	7683	196	125	0.55	67
500	1450	25	2	8222	178	97	0.55	67
500	1450	30	1	8802	215	122	0.55	68
500	1450	30	2	9424	196	89	0.55	68
500	1450	35	1	10023	233	112	0.75	69
500	1450	35	2	10933	215	71	0.75	69
500	1450	40	1	11854	254	55	1.1	70
500	1450	40	2	12716	234	39	1.1	70
500	960	25	1	5122	87	55	0.18	62
500	960	25	2	5481	79	43	0.18	62
500	960	30	1	5868	96	54	0.18	63
500	960	30	2	6283	87	40	0.18	63
500	960	35	1	6682	104	50	0.25	64
500	960	35	2	7289	96	32	0.25	64
500	960	40	1	7903	113	24	0.37	65
500	960	40	2	8477	104	17	0.37	65
Model	Rotation	Angle	Conditions	Air-volume	Total Pressure	Static pressure	Power	Noise
	r/min	°		m³/h	pa	pa	kw	dB（A）
560	1450	25	1	9412	284	221	0.75	69
560	1450	25	2	10358	246	170	0.75	69
560	1450	30	1	11462	304	211	1.1	70
560	1450	30	2	12438	275	165	1.1	70
560	1450	35	1	13254	325	200	1.5	71
560	1450	35	2	14523	307	157	1.5	71
560	1450	40	1	15021	354	194	1.5	72
560	1450	40	2	16395	329	138	1.5	72
560	960	25	1	6275	126	98	0.25	64
560	960	25	2	6905	109	75	0.25	64
560	960	30	1	7641	135	94	0.37	65
560	960	30	2	8292	122	73	0.37	65
560	960	35	1	8836	144	89	0.37	66
560	960	35	2	9682	136	70	0.37	66
560	960	40	1	10014	157	86	0.55	67
560	960	40	2	10930	146	61	0.55	67
600	1450	25	1	11920	305	228	1.1	71
600	1450	25	2	13262	277	182	1.1	71
600	1450	30	1	14512	335	221	1.5	72
600	1450	30	2	15823	310	174	1.5	72
600	1450	35	1	16928	367	212	2.2	73
600	1450	35	2	18592	341	154	2.2	73
600	1450	40	1	19702	396	186	2.2	74
600	1450	40	2	21023	373	133	2.2	74
600	960	25	1	7947	136	101	0.37	66
600	960	25	2	8841	123	81	0.37	66
600	960	30	1	9675	149	98	0.55	67
600	960	30	2	10549	138	77	0.55	67
600	960	35	1	11285	163	94	0.75	68
600	960	35	2	12395	152	68	0.75	68
600	960	40	1	13135	176	82	0.75	69
600	960	40	2	14015	166	59	0.75	69
630	1450	25	1	12590	323	252	1.5	73
630	1450	25	2	14469	297	203	1.5	73
630	1450	30	1	16672	351	227	2.2	75
630	1450	30	2	18121	235	88	2.2	75
630	1450	35	1	20576	375	186	2.2	77
630	1450	35	2	22421	356	131	2.2	77
630	1450	40	1	24120	395	135	3	78
630	1450	40	2	26340	371	61	3	78
630	960	25	1	8393	144	112	0.55	67
630	960	25	2	9646	132	90	0.55	67
630	960	30	1	11150	156	101	0.55	68
630	960	30	2	12081	104	39	0.55	68
630	960	35	1	13717	167	82	0.75	69
630	960	35	2	14947	158	58	0.75	69
630	960	40	1	16080	176	60	1.1	70
630	960	40	2	17560	165	27	1.1	70
Model	Rotation	Angle	Conditions	Air-volume	Total Pressure	Static pressure	Power	Noise
	r/min	°		m³/h	pa	pa	kw	dB（A）
710	1450	25	1	16348	415	340	2.2	76
710	1450	25	2	19154	393	291	2.2	76
710	1450	30	1	21546	443	313	3	78
710	1450	30	2	23365	415	263	3	78
710	1450	35	1	26564	471	274	4	80
710	1450	35	2	29798	442	194	4	80
710	1450	40	1	32970	498	194	5.5	81
710	1450	40	2	35154	456	111	5.5	81
710	960	25	1	10899	184	151	0.75	70
710	960	25	2	12769	175	129	0.75	70
710	960	30	1	14364	197	139	1.1	72
710	960	30	2	15577	184	117	1.1	72
710	960	35	1	17709	209	122	1.1	74
710	960	35	2	19865	196	86	1.1	74
710	960	40	1	21980	221	86	1.5	75
710	960	40	2	23436	203	49	1.5	75
800	1450	25	1	23321	543	448	4	79
800	1450	25	2	25437	466	353	4	79
800	1450	30	1	28068	563	426	5.5	80
800	1450	30	2	31423	508	336	5.5	80
800	1450	35	1	34315	621	416	7.5	81
800	1450	35	2	37807	588	339	7.5	81
800	1450	40	1	40654	678	390	11	82
800	1450	40	2	43064	621	298	11	82
800	960	25	1	15547	241	199	1.1	71
800	960	25	2	16958	207	157	1.1	71
800	960	30	1	18712	250	189	1.5	72
800	960	30	2	20949	226	149	1.5	72
800	960	35	1	22877	276	185	2.2	73
800	960	35	2	25205	261	151	2.2	73
800	960	40	1	27103	301	173	3	74
800	960	40	2	28709	276	132	3	74
900	1450	25	1	33333	674	552	7.5	82
900	1450	25	2	37075	599	449	7.5	82
900	1450	30	1	40860	712	529	11	83
900	1450	30	2	44731	663	444	11	83
900	1450	35	1	48536	795	453	15	84
900	1450	35	2	51387	755	466	15	84
900	1450	40	1	54042	824	504	15	85
900	1450	40	2	59621	774	385	15	85
900	960	25	1	22222	300	246	2.2	73
900	960	25	2	24717	266	199	2.2	73
900	960	30	1	27240	316	235	3	74
900	960	30	2	29821	295	197	3	74
900	960	35	1	32357	353	239	4	75
900	960	35	2	34258	336	207	4	75
900	960	40	1	36028	366	224	4	76
900	960	40	2	39747	344	171	4	76
Model	Rotation	Angle	Conditions	Air-volume	Total Pressure	Static pressure	Power	Noise
	r/min	°		m³/h	pa	pa	kw	dB（A）
1000	1450	25	1	53231	822	618	15	86
1000	1450	25	2	56314	742	513	15	86
1000	1450	30	1	59865	875	617	18.5	87
1000	1450	30	2	63497	790	499	18.5	87
1000	1450	35	1	66053	923	608	18.5	88
1000	1450	35	2	69513	877	529	18.5	88
1000	1450	40	1	72187	980	604	22	89
1000	1450	40	2	75314	922	513	22	89
1000	960	25	1	35487	365	275	4	77
1000	960	25	2	37543	330	228	4	77
1000	960	30	1	39910	389	274	5.5	78
1000	960	30	2	42331	351	222	5.5	78
1000	960	35	1	44035	410	270	5.5	79
1000	960	35	2	46342	390	235	5.5	79
1000	960	40	1	48125	436	269	7.5	80
1000	960	40	2	50209	410	228	7.5	80
1120	960	25	1	45991	468	371	7.5	80
1120	960	25	2	48045	424	318	7.5	80
1120	960	30	1	51429	510	388	11	81
1120	960	30	2	54635	478	341	11	81
1120	960	35	1	57572	536	383	11	82
1120	960	35	2	60030	512	346	11	82
1120	960	40	1	63939	562	374	15	83
1120	960	40	2	67207	536	328	15	83
1120	720	25	1	34502	263	209	3	76
1120	720	25	2	36043	239	174	3	76
1120	720	30	1	38581	287	218	4	77
1120	720	30	2	40986	269	192	4	77
1120	720	35	1	43190	302	216	4	78
1120	720	35	2	45034	288	195	4	78
1120	720	40	1	47966	316	210	5.5	79
1120	720	40	2	50418	302	185	5.5	79
1250	960	25	1	62756	567	450	11	83
1250	960	25	2	68534	507	367	11	83
1250	960	30	1	73894	605	442	15	84
1250	960	30	2	78753	564	379	15	84
1250	960	35	1	81064	637	441	18.5	85
1250	960	35	2	85132	600	384	18.5	85
1250	960	40	1	90075	674	432	18.5	86
1250	960	40	2	94532	631	365	18.5	86
1250	720	25	1	48274	334	264	5.5	78
1250	720	25	2	52718	298	215	5.5	78
1250	720	30	1	56842	356	260	7.5	79
1250	720	30	2	60579	332	222	7.5	79
1250	720	35	1	62357	375	259	7.5	80
1250	720	35	2	65486	353	225	7.5	80
1250	720	40	1	69288	396	254	11	81
1250	720	40	2	72717	371	214	11	81
1400	960	25	1	86643	753	606	18.5	87
1400	960	25	2	92314	674	508	18.5	87
1400	960	30	1	102324	798	593	30	88
1400	960	30	2	117075	721	453	30	88
1400	960	35	1	121068	845	559	30	89
1400	960	35	2	128075	795	475	30	89
1400	960	40	1	132864	886	541	37	90
1400	960	40	2	138075	842	470	37	90
1400	720	25	1	66648	443	356	11	81
1400	720	25	2	71011	396	298	11	81
1400	720	30	1	78711	469	348	11	82
1400	720	30	2	90058	424	266	11	82
1400	720	35	1	93129	497	328	15	83
1400	720	35	2	38519	468	278	15	83
1400	720	40	1	102203	521	317	15	84
1400	720	40	2	106204	495	275	15	84

BYZ T35 Series Dual Low Noise Axial Fan

Tue, 09 Oct 2012 20:04:15 GMT

Model	Rotation	Angle	Conditions	Air-volume	Total Pressure	Static pressure	Power	Noise
	r/min	°		m³/h	pa	pa	kw	dB（A）
280	2900	25	1	2315	200	135	0.18	60
280	2900	25	2	2547	191	112	0.18	60
280	2900	30	1	2845	235	124	0.25	61
280	2900	30	2	3056	226	100	0.25	61
280	2900	35	1	3325	263	109	0.25	62
280	2900	35	2	3542	254	81	0.25	62
280	2900	40	1	3854	294	93	0.37	63
280	2900	40	2	4056	286	66	0.37	63
280	1450	25	1	1158	50	34	0.04	56
280	1450	25	2	1274	48	28	0.04	56
280	1450	30	1	1423	59	31	0.04	57
280	1450	30	2	1528	57	25	0.04	57
280	1450	35	1	1663	66	27	0.04	58
280	1450	35	2	1771	64	20	0.04	58
280	1450	40	1	1927	74	23	0.06	59
280	1450	40	2	2028	72	17	0.06	59
315	2900	25	1	3742	287	181	0.37	61
315	2900	25	2	3947	275	157	0.37	61
315	2900	30	1	4258	307	169	0.55	62
315	2900	30	2	4468	297	145	0.55	62
315	2900	35	1	4752	328	157	0.55	63
315	2900	35	2	4957	316	129	0.55	63
315	2900	40	1	5264	346	136	0.55	64
315	2900	40	2	5547	335	101	0.55	64
315	1450	25	1	1871	72	45	0.06	57
315	1450	25	2	1974	69	39	0.06	57
315	1450	30	1	2129	77	42	0.06	58
315	1450	30	2	2234	74	36	0.06	58
315	1450	35	1	2376	82	39	0.06	59
315	1450	35	2	2479	79	32	0.06	59
315	1450	40	1	2632	87	34	0.09	60
315	1450	40	2	2774	84	25	0.09	60
355	2900	25	1	5468	311	170	0.55	62
355	2900	25	2	5796	298	140	0.55	62
355	2900	30	1	6016	335	165	0.75	63
355	2900	30	2	6348	322	132	0.75	63
355	2900	35	1	6648	366	158	0.75	64
355	2900	35	2	6942	354	127	0.75	64
355	2900	40	1	7254	396	148	1.1	65
355	2900	40	2	6942	383	117	1.1	65
355	1450	25	1	2734	78	43	0.09	58
355	1450	25	2	2898	75	35	0.09	58
355	1450	30	1	3008	84	41	0.09	59
355	1450	30	2	3174	81	33	0.09	59
355	1450	35	1	3324	92	40	0.12	60
355	1450	35	2	3471	89	32	0.12	60
355	1450	40	1	3627	99	37	0.12	61
355	1450	40	2	3758	96	29	0.12	61
Model	Rotation	Angle	Conditions	Air-volume	Total Pressure	Static pressure	Power	Noise
	r/min	°		m³/h	pa	pa	kw	dB（A）
400	2900	25	1	7326	433	276	1.1	63
400	2900	25	2	7765	411	234	1.1	63
400	2900	30	1	8154	461	266	1.1	64
400	2900	30	2	8546	442	228	1.1	64
400	2900	35	1	8952	496	261	1.5	65
400	2900	35	2	9312	476	222	1.5	65
400	2900	40	1	9950	523	233	1.5	66
400	2900	40	2	10576	500	172	1.5	66
400	1450	25	1	3663	108	69	0.12	59
400	1450	25	2	3883	103	59	0.12	59
400	1450	30	1	4077	115	67	0.18	60
400	1450	30	2	4273	111	57	0.18	60
400	1450	35	1	4476	124	65	0.18	61
400	1450	35	2	4656	119	56	0.18	61
400	1450	40	1	4975	131	58	0.25	62
400	1450	40	2	5288	125	43	0.25	62
450	1450	25	1	5656	176	117	0.37	65
450	1450	25	2	6052	165	98	0.37	65
450	1450	30	1	6499	192	115	0.55	66
450	1450	30	2	6885	181	94	0.55	66
450	1450	35	1	7256	215	119	0.55	67
450	1450	35	2	7652	206	99	0.55	67
450	1450	40	1	8025	235	117	0.75	68
450	1450	40	2	8452	223	92	0.75	68
450	960	25	1	3771	78	52	0.12	60
450	960	25	2	4035	73	44	0.12	60
450	960	30	1	4333	85	51	0.12	61
450	960	30	2	4590	80	42	0.12	61
450	960	35	1	4837	96	53	0.18	62
450	960	35	2	5101	92	44	0.18	62
450	960	40	1	5350	104	52	0.18	63
450	960	40	2	5635	99	41	0.18	63
500	1450	25	1	7683	196	125	0.55	67
500	1450	25	2	8222	178	97	0.55	67
500	1450	30	1	8802	215	122	0.55	68
500	1450	30	2	9424	196	89	0.55	68
500	1450	35	1	10023	233	112	0.75	69
500	1450	35	2	10933	215	71	0.75	69
500	1450	40	1	11854	254	55	1.1	70
500	1450	40	2	12716	234	39	1.1	70
500	960	25	1	5122	87	55	0.18	62
500	960	25	2	5481	79	43	0.18	62
500	960	30	1	5868	96	54	0.18	63
500	960	30	2	6283	87	40	0.18	63
500	960	35	1	6682	104	50	0.25	64
500	960	35	2	7289	96	32	0.25	64
500	960	40	1	7903	113	24	0.37	65
500	960	40	2	8477	104	17	0.37	65
Model	Rotation	Angle	Conditions	Air-volume	Total Pressure	Static pressure	Power	Noise
	r/min	°		m³/h	pa	pa	kw	dB（A）
560	1450	25	1	9412	284	221	0.75	69
560	1450	25	2	10358	246	170	0.75	69
560	1450	30	1	11462	304	211	1.1	70
560	1450	30	2	12438	275	165	1.1	70
560	1450	35	1	13254	325	200	1.5	71
560	1450	35	2	14523	307	157	1.5	71
560	1450	40	1	15021	354	194	1.5	72
560	1450	40	2	16395	329	138	1.5	72
560	960	25	1	6275	126	98	0.25	64
560	960	25	2	6905	109	75	0.25	64
560	960	30	1	7641	135	94	0.37	65
560	960	30	2	8292	122	73	0.37	65
560	960	35	1	8836	144	89	0.37	66
560	960	35	2	9682	136	70	0.37	66
560	960	40	1	10014	157	86	0.55	67
560	960	40	2	10930	146	61	0.55	67
600	1450	25	1	11920	305	228	1.1	71
600	1450	25	2	13262	277	182	1.1	71
600	1450	30	1	14512	335	221	1.5	72
600	1450	30	2	15823	310	174	1.5	72
600	1450	35	1	16928	367	212	2.2	73
600	1450	35	2	18592	341	154	2.2	73
600	1450	40	1	19702	396	186	2.2	74
600	1450	40	2	21023	373	133	2.2	74
600	960	25	1	7947	136	101	0.37	66
600	960	25	2	8841	123	81	0.37	66
600	960	30	1	9675	149	98	0.55	67
600	960	30	2	10549	138	77	0.55	67
600	960	35	1	11285	163	94	0.75	68
600	960	35	2	12395	152	68	0.75	68
600	960	40	1	13135	176	82	0.75	69
600	960	40	2	14015	166	59	0.75	69
630	1450	25	1	12590	323	252	1.5	73
630	1450	25	2	14469	297	203	1.5	73
630	1450	30	1	16672	351	227	2.2	75
630	1450	30	2	18121	235	88	2.2	75
630	1450	35	1	20576	375	186	2.2	77
630	1450	35	2	22421	356	131	2.2	77
630	1450	40	1	24120	395	135	3	78
630	1450	40	2	26340	371	61	3	78
630	960	25	1	8393	144	112	0.55	67
630	960	25	2	9646	132	90	0.55	67
630	960	30	1	11150	156	101	0.55	68
630	960	30	2	12081	104	39	0.55	68
630	960	35	1	13717	167	82	0.75	69
630	960	35	2	14947	158	58	0.75	69
630	960	40	1	16080	176	60	1.1	70
630	960	40	2	17560	165	27	1.1	70
Model	Rotation	Angle	Conditions	Air-volume	Total Pressure	Static pressure	Power	Noise
	r/min	°		m³/h	pa	pa	kw	dB（A）
710	1450	25	1	16348	415	340	2.2	76
710	1450	25	2	19154	393	291	2.2	76
710	1450	30	1	21546	443	313	3	78
710	1450	30	2	23365	415	263	3	78
710	1450	35	1	26564	471	274	4	80
710	1450	35	2	29798	442	194	4	80
710	1450	40	1	32970	498	194	5.5	81
710	1450	40	2	35154	456	111	5.5	81
710	960	25	1	10899	184	151	0.75	70
710	960	25	2	12769	175	129	0.75	70
710	960	30	1	14364	197	139	1.1	72
710	960	30	2	15577	184	117	1.1	72
710	960	35	1	17709	209	122	1.1	74
710	960	35	2	19865	196	86	1.1	74
710	960	40	1	21980	221	86	1.5	75
710	960	40	2	23436	203	49	1.5	75
800	1450	25	1	23321	543	448	4	79
800	1450	25	2	25437	466	353	4	79
800	1450	30	1	28068	563	426	5.5	80
800	1450	30	2	31423	508	336	5.5	80
800	1450	35	1	34315	621	416	7.5	81
800	1450	35	2	37807	588	339	7.5	81
800	1450	40	1	40654	678	390	11	82
800	1450	40	2	43064	621	298	11	82
800	960	25	1	15547	241	199	1.1	71
800	960	25	2	16958	207	157	1.1	71
800	960	30	1	18712	250	189	1.5	72
800	960	30	2	20949	226	149	1.5	72
800	960	35	1	22877	276	185	2.2	73
800	960	35	2	25205	261	151	2.2	73
800	960	40	1	27103	301	173	3	74
800	960	40	2	28709	276	132	3	74
900	1450	25	1	33333	674	552	7.5	82
900	1450	25	2	37075	599	449	7.5	82
900	1450	30	1	40860	712	529	11	83
900	1450	30	2	44731	663	444	11	83
900	1450	35	1	48536	795	453	15	84
900	1450	35	2	51387	755	466	15	84
900	1450	40	1	54042	824	504	15	85
900	1450	40	2	59621	774	385	15	85
900	960	25	1	22222	300	246	2.2	73
900	960	25	2	24717	266	199	2.2	73
900	960	30	1	27240	316	235	3	74
900	960	30	2	29821	295	197	3	74
900	960	35	1	32357	353	239	4	75
900	960	35	2	34258	336	207	4	75
900	960	40	1	36028	366	224	4	76
900	960	40	2	39747	344	171	4	76
Model	Rotation	Angle	Conditions	Air-volume	Total Pressure	Static pressure	Power	Noise
	r/min	°		m³/h	pa	pa	kw	dB（A）
1000	1450	25	1	53231	822	618	15	86
1000	1450	25	2	56314	742	513	15	86
1000	1450	30	1	59865	875	617	18.5	87
1000	1450	30	2	63497	790	499	18.5	87
1000	1450	35	1	66053	923	608	18.5	88
1000	1450	35	2	69513	877	529	18.5	88
1000	1450	40	1	72187	980	604	22	89
1000	1450	40	2	75314	922	513	22	89
1000	960	25	1	35487	365	275	4	77
1000	960	25	2	37543	330	228	4	77
1000	960	30	1	39910	389	274	5.5	78
1000	960	30	2	42331	351	222	5.5	78
1000	960	35	1	44035	410	270	5.5	79
1000	960	35	2	46342	390	235	5.5	79
1000	960	40	1	48125	436	269	7.5	80
1000	960	40	2	50209	410	228	7.5	80
1120	960	25	1	45991	468	371	7.5	80
1120	960	25	2	48045	424	318	7.5	80
1120	960	30	1	51429	510	388	11	81
1120	960	30	2	54635	478	341	11	81
1120	960	35	1	57572	536	383	11	82
1120	960	35	2	60030	512	346	11	82
1120	960	40	1	63939	562	374	15	83
1120	960	40	2	67207	536	328	15	83
1120	720	25	1	34502	263	209	3	76
1120	720	25	2	36043	239	174	3	76
1120	720	30	1	38581	287	218	4	77
1120	720	30	2	40986	269	192	4	77
1120	720	35	1	43190	302	216	4	78
1120	720	35	2	45034	288	195	4	78
1120	720	40	1	47966	316	210	5.5	79
1120	720	40	2	50418	302	185	5.5	79
1250	960	25	1	62756	567	450	11	83
1250	960	25	2	68534	507	367	11	83
1250	960	30	1	73894	605	442	15	84
1250	960	30	2	78753	564	379	15	84
1250	960	35	1	81064	637	441	18.5	85
1250	960	35	2	85132	600	384	18.5	85
1250	960	40	1	90075	674	432	18.5	86
1250	960	40	2	94532	631	365	18.5	86
1250	720	25	1	48274	334	264	5.5	78
1250	720	25	2	52718	298	215	5.5	78
1250	720	30	1	56842	356	260	7.5	79
1250	720	30	2	60579	332	222	7.5	79
1250	720	35	1	62357	375	259	7.5	80
1250	720	35	2	65486	353	225	7.5	80
1250	720	40	1	69288	396	254	11	81
1250	720	40	2	72717	371	214	11	81
1400	960	25	1	86643	753	606	18.5	87
1400	960	25	2	92314	674	508	18.5	87
1400	960	30	1	102324	798	593	30	88
1400	960	30	2	117075	721	453	30	88
1400	960	35	1	121068	845	559	30	89
1400	960	35	2	128075	795	475	30	89
1400	960	40	1	132864	886	541	37	90
1400	960	40	2	138075	842	470	37	90
1400	720	25	1	66648	443	356	11	81
1400	720	25	2	71011	396	298	11	81
1400	720	30	1	78711	469	348	11	82
1400	720	30	2	90058	424	266	11	82
1400	720	35	1	93129	497	328	15	83
1400	720	35	2	38519	468	278	15	83
1400	720	40	1	102203	521	317	15	84
1400	720	40	2	106204	495	275	15	84

ZDG fire fighting and ventilation Dual-purpose Cabinet Centrifugal Fan

Thu, 30 Jun 2011 11:13:56 GMT

ZDG fire fighting and ventilation Dual-purpose Cabinet Centrifugal Fan/ ventilation fan

ZDG The main technical paramenters

(No)	Rotation (r/min)	Power (Kw-P)	Air-volume (m³/h)	Pressure (Pa)	Noise dB(A)
9	1000	0.55-4	3495-1838	155-207	≤57
	1200	0.75-4	4194-2205	223-299	≤58
	1400	1.1-4	4893-2573	303-406	≤60
	1500	1.5-4	5243-2756	348-466	≤62
10	900	0.75-4	3675-1838	166-216	≤56
	1100	1.1-4	4492-2246	248-323	≤57
	1300	1.5-4	5308-2246	347-451	≤59
	1500	2.2-4	6125-3063	462-601	≤63
12	800	1.1-4	5345-2958	199-246	≤59
	900	1.5-4	6014-3328	252-311	≤60
	1000	2.2-4	6682-3697	311-384	≤60
	1200	3.0-4	8018-4437	448-553	≤64
15	600	1.5-4	7085-3575	165-207	≤62
	700	2.2-4	8266-4171	225-282	≤62
	850	3.0-4	10038-5065	331-415	≤63
	900	4.0-4	10628-5363	371-

CF4-82 Kitchen Special-Purpose Centrifugal Ventilator

Thu, 30 Jun 2011 11:14:09 GMT

CF4-82 Kitchen Special-Purpose Centrifugal Ventilator / Low noise & high efficient centrifugal fan

CF4-82 is driven in type A.The motor is fixed in one side of the fans.No extra holder is needed.The structure is compact and is convenient for installation.It looks beautiful.The inlet is easy to be adjusted.the blades made of flat plate can reduce the greasy dirt on the blades and is easy to clean.There is a set for noise elimination in the inlet so it produces less noise than 4-72 in same size.

This kind of fan is specially designed for kitchen to exhaust smoke.It can also be used to ventilate and exchange air.

CF4-82A The main technical paramenters

(No)	Rotation (r/min)	Power (Kw-P)	Air-volume (m³/h)	Pressure (Pa)	Noise dB(A)
3.55	1450	0.55-4	2050-3050	373-248	≤69
4	1450	0.75-4	3050-4450	505-345	≤71
4.5	1450	1.1-4	3900-5454	618-428	≤71
5	1450	2.2-4	5850-8200	800-500	≤74
5.6	1450	3.0-4	8124-11475	965-625	≤78
5.6	960	1.5-6	4781-1475	389-252	≤74
6	1450	4-4	8663-13080	1008-657	≤84
6	960	1.5-6	5700-8660	442-286	≤75
6.3	1450	5.5-4	9990-14200	1110-718	≤85
6.3	960	2.2-6	6600-9350	488-316	≤76
7.1	1450	11-4	12146-21227	1544-1091	≤86
7.1	960	3.0-6	8044-14057	372-50

SF Low Noise Axial Fan

Tue, 09 Oct 2012 21:29:43 GMT

Model SF series axial-flow ventilator has smooth streamline surface with exceptionally rigidity,firm paddle-wheel structure,even and flat screen cover,elegant and pleasing outline and tones.Model SF series fan is divided into pipline type,stand type,wall type and fixed type four kinds according to the use requirements.It is separated into12 machine numbers according to the paddle-wheel diameter.

This series product is widely applicable for the wall type exhaust,post blast,pipline ventilation in the mining and industrial enterprises,civil purpose buildings.It can also be used in the working occasions of chemical,light industry,food,medicine,metallurgy,power station,communications etc and the storage ventilation air-conditioner system.

SF Low Noise Axial-flow Ventilator/The main technical paraments Remark：R is single-phase
(No)	Rotation	Air-flow	Power	Pressure	Noise
(No)	(r/min)	(m3)	(KW)	(Pa)	dB(A)
SF2-2	2800	1300	0.12	140	62
SF2-2R	2800	1300	0.12	140	62
SF2-4	1450	600	0.06	20	57
SF2-4R	1450	600	0.06	20	57
SF2.5-2	2800	2100	0.25	215	65
SF2.5-2R	2800	2100	0.25	215	65
SF2.5-4	1450	1000	0.09	35	59
SF2.5-4R	1450	1000	0.09	35	59
SF3-2	2800	3000	0.37	230	68
SF3-2R	2800	3000	0.37	230	68
SF3-4	1450	2000	0.12	59	61
SF3-4R	1450	2000	0.12	59	61
SF4-4	1450	5870	0.55	149	72
SF4-4R	1450	5870	0.37	149	72
SF4-2	2800	11000	1.5	270	75
SF4-2R	2800	11000	1.5	270	75
SF5-4	1450	10000	0.75	200	74
SF5-4R	1450	10000	0.75	200	74
SF6-4	1450	18700	2.2	300	80
SF6-4R	1450	16870	1.5	280	80
SF6-4	1450	16870	1.5	280	80
SF7-4	1450	21500	2.2	330	85
SF7-4	1450	24500	3	350	85
SF8-4	1450	37200	4	435	88
SF8-6	960	28000	2.2	196	82
SF9-6	960	34470	4	250	82
SF10-6	960	50000	4	260	88
SF12-8	720	58000	4	280	90
SF14-8	720	72000	5.5	320	93

BYZ T35 Series Dual Low Noise Axial Fan

Tue, 09 Oct 2012 16:41:19 GMT

Model	Rotation	Angle	Conditions	Air-volume	Total Pressure	Static pressure	Power	Noise
	r/min	°		m³/h	pa	pa	kw	dB（A）
280	2900	25	1	2315	200	135	0.18	60
280	2900	25	2	2547	191	112	0.18	60
280	2900	30	1	2845	235	124	0.25	61
280	2900	30	2	3056	226	100	0.25	61
280	2900	35	1	3325	263	109	0.25	62
280	2900	35	2	3542	254	81	0.25	62
280	2900	40	1	3854	294	93	0.37	63
280	2900	40	2	4056	286	66	0.37	63
280	1450	25	1	1158	50	34	0.04	56
280	1450	25	2	1274	48	28	0.04	56
280	1450	30	1	1423	59	31	0.04	57
280	1450	30	2	1528	57	25	0.04	57
280	1450	35	1	1663	66	27	0.04	58
280	1450	35	2	1771	64	20	0.04	58
280	1450	40	1	1927	74	23	0.06	59
280	1450	40	2	2028	72	17	0.06	59
315	2900	25	1	3742	287	181	0.37	61
315	2900	25	2	3947	275	157	0.37	61
315	2900	30	1	4258	307	169	0.55	62
315	2900	30	2	4468	297	145	0.55	62
315	2900	35	1	4752	328	157	0.55	63
315	2900	35	2	4957	316	129	0.55	63
315	2900	40	1	5264	346	136	0.55	64
315	2900	40	2	5547	335	101	0.55	64
315	1450	25	1	1871	72	45	0.06	57
315	1450	25	2	1974	69	39	0.06	57
315	1450	30	1	2129	77	42	0.06	58
315	1450	30	2	2234	74	36	0.06	58
315	1450	35	1	2376	82	39	0.06	59
315	1450	35	2	2479	79	32	0.06	59
315	1450	40	1	2632	87	34	0.09	60
315	1450	40	2	2774	84	25	0.09	60
355	2900	25	1	5468	311	170	0.55	62
355	2900	25	2	5796	298	140	0.55	62
355	2900	30	1	6016	335	165	0.75	63
355	2900	30	2	6348	322	132	0.75	63
355	2900	35	1	6648	366	158	0.75	64
355	2900	35	2	6942	354	127	0.75	64
355	2900	40	1	7254	396	148	1.1	65
355	2900	40	2	6942	383	117	1.1	65
355	1450	25	1	2734	78	43	0.09	58
355	1450	25	2	2898	75	35	0.09	58
355	1450	30	1	3008	84	41	0.09	59
355	1450	30	2	3174	81	33	0.09	59
355	1450	35	1	3324	92	40	0.12	60
355	1450	35	2	3471	89	32	0.12	60
355	1450	40	1	3627	99	37	0.12	61
355	1450	40	2	3758	96	29	0.12	61
Model	Rotation	Angle	Conditions	Air-volume	Total Pressure	Static pressure	Power	Noise
	r/min	°		m³/h	pa	pa	kw	dB（A）
400	2900	25	1	7326	433	276	1.1	63
400	2900	25	2	7765	411	234	1.1	63
400	2900	30	1	8154	461	266	1.1	64
400	2900	30	2	8546	442	228	1.1	64
400	2900	35	1	8952	496	261	1.5	65
400	2900	35	2	9312	476	222	1.5	65
400	2900	40	1	9950	523	233	1.5	66
400	2900	40	2	10576	500	172	1.5	66
400	1450	25	1	3663	108	69	0.12	59
400	1450	25	2	3883	103	59	0.12	59
400	1450	30	1	4077	115	67	0.18	60
400	1450	30	2	4273	111	57	0.18	60
400	1450	35	1	4476	124	65	0.18	61
400	1450	35	2	4656	119	56	0.18	61
400	1450	40	1	4975	131	58	0.25	62
400	1450	40	2	5288	125	43	0.25	62
450	1450	25	1	5656	176	117	0.37	65
450	1450	25	2	6052	165	98	0.37	65
450	1450	30	1	6499	192	115	0.55	66
450	1450	30	2	6885	181	94	0.55	66
450	1450	35	1	7256	215	119	0.55	67
450	1450	35	2	7652	206	99	0.55	67
450	1450	40	1	8025	235	117	0.75	68
450	1450	40	2	8452	223	92	0.75	68
450	960	25	1	3771	78	52	0.12	60
450	960	25	2	4035	73	44	0.12	60
450	960	30	1	4333	85	51	0.12	61
450	960	30	2	4590	80	42	0.12	61
450	960	35	1	4837	96	53	0.18	62
450	960	35	2	5101	92	44	0.18	62
450	960	40	1	5350	104	52	0.18	63
450	960	40	2	5635	99	41	0.18	63
500	1450	25	1	7683	196	125	0.55	67
500	1450	25	2	8222	178	97	0.55	67
500	1450	30	1	8802	215	122	0.55	68
500	1450	30	2	9424	196	89	0.55	68
500	1450	35	1	10023	233	112	0.75	69
500	1450	35	2	10933	215	71	0.75	69
500	1450	40	1	11854	254	55	1.1	70
500	1450	40	2	12716	234	39	1.1	70
500	960	25	1	5122	87	55	0.18	62
500	960	25	2	5481	79	43	0.18	62
500	960	30	1	5868	96	54	0.18	63
500	960	30	2	6283	87	40	0.18	63
500	960	35	1	6682	104	50	0.25	64
500	960	35	2	7289	96	32	0.25	64
500	960	40	1	7903	113	24	0.37	65
500	960	40	2	8477	104	17	0.37	65
Model	Rotation	Angle	Conditions	Air-volume	Total Pressure	Static pressure	Power	Noise
	r/min	°		m³/h	pa	pa	kw	dB（A）
560	1450	25	1	9412	284	221	0.75	69
560	1450	25	2	10358	246	170	0.75	69
560	1450	30	1	11462	304	211	1.1	70
560	1450	30	2	12438	275	165	1.1	70
560	1450	35	1	13254	325	200	1.5	71
560	1450	35	2	14523	307	157	1.5	71
560	1450	40	1	15021	354	194	1.5	72
560	1450	40	2	16395	329	138	1.5	72
560	960	25	1	6275	126	98	0.25	64
560	960	25	2	6905	109	75	0.25	64
560	960	30	1	7641	135	94	0.37	65
560	960	30	2	8292	122	73	0.37	65
560	960	35	1	8836	144	89	0.37	66
560	960	35	2	9682	136	70	0.37	66
560	960	40	1	10014	157	86	0.55	67
560	960	40	2	10930	146	61	0.55	67
600	1450	25	1	11920	305	228	1.1	71
600	1450	25	2	13262	277	182	1.1	71
600	1450	30	1	14512	335	221	1.5	72
600	1450	30	2	15823	310	174	1.5	72
600	1450	35	1	16928	367	212	2.2	73
600	1450	35	2	18592	341	154	2.2	73
600	1450	40	1	19702	396	186	2.2	74
600	1450	40	2	21023	373	133	2.2	74
600	960	25	1	7947	136	101	0.37	66
600	960	25	2	8841	123	81	0.37	66
600	960	30	1	9675	149	98	0.55	67
600	960	30	2	10549	138	77	0.55	67
600	960	35	1	11285	163	94	0.75	68
600	960	35	2	12395	152	68	0.75	68
600	960	40	1	13135&, lt;, /td>	176	82	0.75	69
600	960	40	2	14015	166	59	0.75	69
630	1450	25	1	12590	323	252	1.5	73
630	1450	25	2	14469	297	203	1.5	73
630	1450	30	1	16672	351	227	2.2	75
630	1450	30	2	18121	235	88	2.2	75
630	1450	35	1	20576	375	186	2.2	77
630	1450	35	2	22421	356	131	2.2	77
630	1450	40	1	24120	395	135	3	78
630	1450	40	2	26340	371	61	3	78
630	960	25	1	8393	144	112	0.55	67
630	960	25	2	9646	132	90	0.55	67
630	960	30	1	11150	156	101	0.55	68
630	960	30	2	12081	104	39	0.55	68
630	960	35	1	13717	167	82	0.75	69
630	960	35	2	14947	158	58	0.75	69
630	960	40	1	16080	176	60	1.1	70
630	960	40	2	17560	165	27	1.1	70
Model	Rotation	Angle	Conditions	Air-volume	Total Pressure	Static pressure	Power	Noise
	r/min	°		m³/h	pa	pa	kw	dB（A）
710	1450	25	1	16348	415	340	2.2	76
710	1450	25	2	19154	393	291	2.2	76
710	1450	30	1	21546	443	313	3	78
710	1450	30	2	23365	415	263	3	78
710	1450	35	1	26564	471	274	4	80
710	1450	35	2	29798	442	194	4	80
710	1450	40	1	32970	498	194	5.5	81
710	1450	40	2	35154	456	111	5.5	81
710	960	25	1	10899	184	151	0.75	70
710	960	25	2	12769	175	129	0.75	70
710	960	30	1	14364	197	139	1.1	72
710	960	30	2	15577	184	117	1.1	72
710	960	35	1	17709	209	122	1.1	74
710	960	35	2	19865	196	86	1.1	74
710	960	40	1	21980	221	86	1.5	75
710	960	40	2	23436	203	49	1.5	75
800	1450	25	1	23321	543	448	4	79
800	1450	25	2	25437	466	353	4	79
800	1450	30	1	28068	563	426	5.5	80
800	1450	30	2	31423	508	336	5.5	80
800	1450	35	1	34315	621	416	7.5	81
800	1450	35	2	37807	588	339	7.5	81
800	1450	40	1	40654	678	390	11	82
800	1450	40	2	43064	621	298	11	82
800	960	25	1	15547	241	199	1.1	71
800	960	25	2	16958	207	157	1.1	71
800	960	30	1	18712	250	189	1.5	72
800	960	30	2	20949	226	149	1.5	72
800	960	35	1	22877	276	185	2.2	73
800	960	35	2	25205	261	151	2.2	73
800	960	40	1	27103	301	173	3	74
800	960	40	2	28709	276	132	3	74
900	1450	25	1	33333	674	552	7.5	82
900	1450	25	2	37075	599	449	7.5	82
900	1450	30	1	40860	712	529	11	83
900	1450	30	2	44731	663	444	11	83
900	1450	35	1	48536	795	453	15	84
900	1450	35	2	51387	755	466	15	84
900	1450	40	1	54042	824	504	15	85
900	1450	40	2	59621	774	385	15	85
900	960	25	1	22222	300	246	2.2	73
900	960	25	2	24717	266	199	2.2	73
900	960	30	1	27240	316	235	3	74
900	960	30	2	29821	295	197	3	74
900	960	35	1	32357	353	239	4	75
900	960	35	2	34258	336	207	4	75
900	960	40	1	36028	366	224	4	76
900	960	40	2	39747	344	171	4	76
Model	Rotation	Angle	Conditions	Air-volume	Total Pressure	Static pressure	Power	Noise
	r/min	°		m³/h	pa	pa	kw	dB（A）
1000	1450	25	1	53231	822	618	15	86
1000	1450	25	2	56314	742	513	15	86
1000	1450	30	1	59865	875	617	18.5	87
1000	1450	30	2	63497	790	499	18.5	87
1000	1450	35	1	66053	923	608	18.5	88
1000	1450	35	2	69513	877	529	18.5	88
1000	1450	40	1	72187	980	604	22	89
1000	1450	40	2	75314	922	513	22	89
1000	960	25	1	35487	365	275	4	77
1000	960	25	2	37543	330	228	4	77
1000	960	30	1	39910	389	274	5.5	78
1000	960	30	2	42331	351	222	5.5	78
1000	960	35	1	44035	410	270	5.5	79
1000	960	35	2	46342	390	235	5.5	79
1000	960	40	1	48125	436	269	7.5	80
1000	960	40	2	50209	410	228	7.5	80
1120	960	25	1	45991	468	371	7.5	80
1120	960	25	2	48045	424	318	7.5	80
1120	960	30	1	51429	510	388	11	81
1120	960	30	2	54635	478	341	11	81
1120	960	35	1	57572	536	383	11	82
1120	960	35	2	60030	512	346	11	82
1120	960	40	1	63939	562	374	15	83
1120	960	40	2	67207	536	328	15	83
1120	720	25	1	34502	263	209	3	76
1120	720	25	2	36043	239	174	3	76
1120	720	30	1	38581	287	218	4	77
1120	720	30	2	40986	269	192	4	77
1120	720	35	1	43190	302	216	4	78
1120	720	35	2	45034	288	195	4	78
1120	720	40	1	47966	316	210	5.5	79
1120	720	40	2	50418	302	185	5.5	79
1250	960	25	1	62756	567	450	11	83
1250	960	25	2	68534	507	367	11	83
1250	960	30	1	73894	605	442	15	84
1250	960	30	2	78753	564	379	15	84
1250	960	35	1	81064	637	441	18.5	85
1250	960	35	2	85132	600	384	18.5	85
1250	960	40	1	90075	674	432	18.5	86
1250	960	40	2	94532	631	365	18.5	86
1250	720	25	1	48274	334	264	5.5	78
1250	720	25	2	52718	298	215	5.5	78
1250	720	30	1	56842	356	260	7.5	79
1250	720	30	2	60579	332	222	7.5	79
1250	720	35	1	62357	375	259	7.5	80
1250	720	35	2	65486	353	225	7.5	80
1250	720	40	1	69288	396	254	11	81
1250	720	40	2	72717	371	214	11	81
1400	960	25	1	86643	753	606	18.5	87
1400	960	25	2	92314	674	508	18.5	87
1400	960	30	1	102324	798	593	30	88
1400	960	30	2	117075	721	453	30	88
1400	960	35	1	121068	845	559	30	89
1400	960	35	2	128075	795	475	30	89
1400	960	40	1	132864	886	541	37	90
1400	960	40	2	138075	842	470	37	90
1400	720	25	1	66648	443	356	11	81
1400	720	25	2	71011	396	298	11	81
1400	720	30	1	78711	469	348	11	82
1400	720	30	2	90058	424	266	11	82
1400	720	35	1	93129	497	328	15	83
1400	720	35	2	38519	468	278	15	83
1400	720	40	1	102203	521	317	15	84
1400	720	40	2	106204	495	275	15	84

Y9-38 series boiler centrifugal fan

Wed, 10 Oct 2012 08:20:08 GMT

Performance Introduction：

The fan applies with economizer (preheater) and smoke and row dust device 0.5 to 35t / h industrial boiler selection. Where inlet conditions similar performance and fit can be selected by the high intake air temperature does not exceed 250 ° C before the induced draft fan must be installed in addition to the dust efficiency of not less than 85% of the dust removal device to reduce flue gas entering the fan with the amount of dust, not only to reduce flue gas pollution of the environment, but also reduce the wear and tear of dust on the fan, is conducive to enhancing the service life of the fan.

Y9-38 main technical parameters

Type	Power	Rotation	Air-volume	Pressure
	(KW)	(r/min)	（m3/h）	(pa)
4D	5.5	2900	3279~4396	2275~2334
4D	7.5	2900	4945~5495	2294~2226
4.5D	11	2930	4694~7824	2873~2814
5D	15	2930	6439~7513	3350~3648
5D	18.5	2930	8586~10733	3658~3481
5.6D	30	2950	9047~12063	4452~4579
5.6D	37	2950	13571~15079	4551~4364
6.3D	5.5	1450	6441~7515	1402~1441
6.3D	7.5	1450	8588~10735	1451~1372
6.3D	45	2970	12882~15029	5639~5786
6.3D	55	2970	17176~19323	5805~5707
6.3D	75	2970	21470	5521
7.1D	11	1450	9219~12292	1784~1873
7.1D	15	1450	13829~16902	1863~1794
7.1D	18.5	1450	18439	1735
8D	22	1450	13189~19783	2275~2363
8D	30	1470	21982~26378	2334~2206
9D	37	1480	18778~25038	2873~3010
9D	55	1480	28168~37557	2991~2785
9D	55	1480	25760~30053	3550~3687
9D	75	1480	34346~42933	3716~3648
9D	90	1480	47226~51519	3569~3442
11.2D	110	1480	36190~48254	4462~4658
11.2D	132	1490	54285~60317	4462~4570
11.2D	160	1490	66349~72381	4471~4324
11.2D	30	980	22960~31947	1951~2039
11.2D	45	980	35941~47921	2030~1892
12.5D	160	1490	50312~58697	5560~5766
12.5D	200	1490	67082	5850
12.5D	250	1490	75468~83853	5766~5697
12.5D	315	1490	92238~100624	5580~5384
12.5D	55	980	33310~44413	2432~2540
12.5D	75	990	49965~61068	2530~2441
12.5D	90	990	66620	2353
12.5D	22	730	25330~29550	1402~1461
12.5D	30	730	33772~42215	1471~1441
12.5D	37	740	46437~50659	1412~1363
14D	75	990	46798	3049
14D	90	990	54597	3167
14D	110	990	62397~70197	3187~3167
14D	132	990	77997~85796	3128~3059
14D	160	990	93596	2961
14D	37	740	35586~41517	1765~1833
14D	45	740	47448~53379	1843~1833
14D	55	740	59310	1814
14D	75	740	65241~71172	1775~1716
16D	160	990	69856~81498	3991~4138
16D	200	990	93141	4176
16D	250	990	104784~128069	4138~4001
16D	280	990	139712	3863
16D	75	740	53119~61973	2304~2392
16D	90	740	70826~79679	2402~2392
16D	110	740	88533~97386	2363~2314
16D	132	740	106239	2235

11-62A Low Noise Centrifugal Ventilator

Wed, 10 Oct 2012 08:25:58 GMT

11-62A multi-vane Centrifugal Ventilator/multi-wing ventilator

It is widely used for the kitchens in canteens,hotels,food store to ventilate and exhaust.It is useful and well-adaptable.

11-62A Low Noise Centrifugal Ventilator/The main technical paramenters
(No)	Rotation	Power	Air-flow	Pressure	Noise
(No)	(r/min)	(Kw-P)	(m3/h)	(Pa)	dB(A)
2..5	1450	0.75-4	1300-3300	450-350	≤65
2.8	1450	1.1-4	2200-5600	570-440	≤69
2.8	980	0.55-6	1430-3600	240-230	≤60
3	1450	2.2-4	3000-5000	600-450	≤71
3	960	0.75-6	1800-4850	270-230	≤61
3.2	1450	2.2-4	3400-8900	760-570	≤73
3.2	960	1.1-6	2180-5700	310-230	≤63
3.5	1450	4.4	4500-9900	910-700	≤76
3.5	960	1.5-6	2900-6400	380-290	≤68
4	960	2.2-6	4445-10500	522-395	≤73
4	960	3.0-6	4600-11800	550-430	≤75
4.5	960	4.0-6	6600-14880	555-440	≤76
5	960	4.0-6	8680-17880	815-616	≤77
5	960	5.5-6	9800-19300	920-640	≤79
6	960	7.5-6	10425-21473	1250-980	≤81

Y2 Series Three-phase Asynchronous Motor

Wed, 10 Oct 2012 08:32:06 GMT

Y2 Series Three-phase Asychronous Motor

Applications:General purpose including cutting machinge,pumps.fans.conveyors.machines tools of farm duty and foodprocess.

Features:High efficiency and energy saving,low noise and little vibrattion.The insulation class is F;the protective class is IP54 or IP55.

Circumstance For Use:The altitude not exceeding 1000m above sea level.The ambient temperature subject to seasonal variationsbut exceeding +40℃ and not less than -15℃。

Technical Parameter

Type	Power	Current	Rotation	Efficiency	Power factor
Y2-63M₁-2	0.18	0.53	2720	65	0.8
Y2-63M₂-2	0.25	0.69	2720	68	0.81
Y2-71M₁-2	0.37	0.99	2740	70	0.81
Y2-71M₂-2	0.55	1.4	2740	73	0.82
Y2-80M₁-2	0.75	1.8	2845	75	0.83
Y2-80M₂-2	1.1	2.6	2845	77	0.84
Y2-90S-2	1.5	3.4	2840	79	0.84
Y2-90L-2	2.2	4.9	2840	81	0.85
Y2-100L-2	3	6.3	2960	83	0.87
Y2-112M-2	4	8.1	2880	85	0.88
Y2-132S₁-2	5.5	11	2900	86	0.88
Y2-132S₂-2	7.5	14.9	2900	87	0.88
Y2-160M₁-2	11	21.3	2930	88	0.89
Y2-160M₂-2	15	28.8	2930	89	0.89
Y2-160L-2	18.5	34.7	2930	90	0.9
Y2-180M-2	22	41	2940	90	0.9
Y2-200L₁-2	30	55.5	2950	91.2	0.9
Y2-200L₂-2	37	67.9	2950	92	0.9
Y2-225M-2	45	82.3	2960	93	0.9
Y2-250M-2	55	100	2965	92.5	0.9
Y2-280S-2	75	135	2970	93	0.9
Y2-280M-2	90	160	2970	93.8	0.91
Y2-315S-2	110	195	2975	94	0.91
Y2-315M-2	132	233	2975	94.5	0.92
Y2-315L₁-2	160	279	2975	94.6	0.92
Y2-315L₂-2	200	348	2975	94.8	0.92
Y2-63M₁-4	0.12	0.44	1310	57	0.72
Y2-63M₂-4	0.18	0.62	1310	60	0.73
Y2-71M₁-4	0.25	0.79	1330	65	0.74
Y2-71M₂-4	0.37	1.12	1330	67	0.75
Y2-80M₁-4	0.55	1.6	1390	71	0.75
Y2-80M₂-4	0.75	2	1390	73	0.76
Y2-90S-4	1.1	2.9	1390	75	0.77
Y2-90L-4	1.5	3.7	1390	78	0.79
Y2-100L₁-4	2.2	5.2	1410	80	0.81
Y2-100L₂-4	3	6.8	1410	82	0.82
Y2-112M-4	4	8.8	1440	84	0.82
Y2-132S-4	5.5	11.8	1440	85	0.83
Y2-132M-4	7.5	15.6	1440	87	0.84
Y2-160M-4	11	22.3	1460	88	0.84
Y2-160L-4	15	30.1	1460	89	0.85
Y2-180M-4	18.5	36.1	1470	90.5	0.86
Y2-180L-4	22	42.7	1470	91	0.86
Y2-200L-4	30	57.6	1470	92	0.86
Y2-225S-4	37	69.9	1475	92.5	0.87
Y2-71M1-6	0.18	0.74	850	56	0.66
Y2-71M2-6	0.25	0.95	850	59	0.68
Y2-80M1-6	0.37	1.3	850	62	0.7
Y2-80M2-6	0.55	1.8	885	65	0.72
Y2-90S-6	0.75	2.3	910	69	0.72
Y2-90L-6	1.1	3.2	910	72	0.73
Y2-100L-6	1.5	3.9	920	76	0.75
Y2-112M-6	2.2	5.6	935	79	0.76
Y2-132S-6	3	7.4	960	81	0.76
Y2-132M1-6	4	9.8	960	82	0.76
Y2-132M2-6	5.5	12.9	965	84	0.77
Y2-160M-6	7.5	17.2	970	86	0.77
Y2-160L-6	11	24.2	970	87.5	0.78
Y2-180M-6	15	31.6	970	89	0.81
Y2-200L1-6	18.5	38.6	980	90	0.81
Y2-20L2-6	22	44.7	980	90	0.83
Y2-225M-6	30	59.3	980	91.5	0.84

Y2 Series Three-phase Asynchronous Motor

Wed, 10 Oct 2012 08:33:42 GMT

Y2 Series Three-phase Asychronous Motor

Applications:General purpose including cutting machinge,pumps.fans.conveyors.machines tools of farm duty and foodprocess.

Features:High efficiency and energy saving,low noise and little vibrattion.The insulation class is F;the protective class is IP54 or IP55.

Circumstance For Use:The altitude not exceeding 1000m above sea level.The ambient temperature subject to seasonal variationsbut exceeding +40℃ and not less than -15℃。

Technical Parameter

Type	Power	Current	Rotation	Efficiency	Power factor
Y2-63M₁-2	0.18	0.53	2720	65	0.8
Y2-63M₂-2	0.25	0.69	2720	68	0.81
Y2-71M₁-2	0.37	0.99	2740	70	0.81
Y2-71M₂-2	0.55	1.4	2740	73	0.82
Y2-80M₁-2	0.75	1.8	2845	75	0.83
Y2-80M₂-2	1.1	2.6	2845	77	0.84
Y2-90S-2	1.5	3.4	2840	79	0.84
Y2-90L-2	2.2	4.9	2840	81	0.85
Y2-100L-2	3	6.3	2960	83	0.87
Y2-112M-2	4	8.1	2880	85	0.88
Y2-132S₁-2	5.5	11	2900	86	0.88
Y2-132S₂-2	7.5	14.9	2900	87	0.88
Y2-160M₁-2	11	21.3	2930	88	0.89
Y2-160M₂-2	15	28.8	2930	89	0.89
Y2-160L-2	18.5	34.7	2930	90	0.9
Y2-180M-2	22	41	2940	90	0.9
Y2-200L₁-2	30	55.5	2950	91.2	0.9
Y2-200L₂-2	37	67.9	2950	92	0.9
Y2-225M-2	45	82.3	2960	93	0.9
Y2-250M-2	55	100	2965	92.5	0.9
Y2-280S-2	75	135	2970	93	0.9
Y2-280M-2	90	160	2970	93.8	0.91
Y2-315S-2	110	195	2975	94	0.91
Y2-315M-2	132	233	2975	94.5	0.92
Y2-315L₁-2	160	279	2975	94.6	0.92
Y2-315L₂-2	200	348	2975	94.8	0.92
Y2-63M₁-4	0.12	0.44	1310	57	0.72
Y2-63M₂-4	0.18	0.62	1310	60	0.73
Y2-71M₁-4	0.25	0.79	1330	65	0.74
Y2-71M₂-4	0.37	1.12	1330	67	0.75
Y2-80M₁-4	0.55	1.6	1390	71	0.75
Y2-80M₂-4	0.75	2	1390	73	0.76
Y2-90S-4	1.1	2.9	1390	75	0.77
Y2-90L-4	1.5	3.7	1390	78	0.79
Y2-100L₁-4	2.2	5.2	1410	80	0.81
Y2-100L₂-4	3	6.8	1410	82	0.82
Y2-112M-4	4	8.8	1440	84	0.82
Y2-132S-4	5.5	11.8	1440	85	0.83
Y2-132M-4	7.5	15.6	1440	87	0.84
Y2-160M-4	11	22.3	1460	88	0.84
Y2-160L-4	15	30.1	1460	89	0.85
Y2-180M-4	18.5	36.1	1470	90.5	0.86
Y2-180L-4	22	42.7	1470	91	0.86
Y2-200L-4	30	57.6	1470	92	0.86
Y2-225S-4	37	69.9	1475	92.5	0.87
Y2-71M1-6	0.18	0.74	850	56	0.66
Y2-71M2-6	0.25	0.95	850	59	0.68
Y2-80M1-6	0.37	1.3	850	62	0.7
Y2-80M2-6	0.55	1.8	885	65	0.72
Y2-90S-6	0.75	2.3	910	69	0.72
Y2-90L-6	1.1	3.2	910	72	0.73
Y2-100L-6	1.5	3.9	920	76	0.75
Y2-112M-6	2.2	5.6	935	79	0.76
Y2-132S-6	3	7.4	960	81	0.76
Y2-132M1-6	4	9.8	960	82	0.76
Y2-132M2-6	5.5	12.9	965	84	0.77
Y2-160M-6	7.5	17.2	970	86	0.77
Y2-160L-6	11	24.2	970	87.5	0.78
Y2-180M-6	15	31.6	970	89	0.81
Y2-200L1-6	18.5	38.6	980	90	0.81
Y2-20L2-6	22	44.7	980	90	0.83
Y2-225M-6	30	59.3	980	91.5	0.84

Y2 Series Three-phase Asynchronous Motor

Wed, 10 Oct 2012 08:34:57 GMT

Y2 Series Three-phase Asychronous Motor

Applications:General purpose including cutting machinge,pumps.fans.conveyors.machines tools of farm duty and foodprocess.

Features:High efficiency and energy saving,low noise and little vibrattion.The insulation class is F;the protective class is IP54 or IP55.

Circumstance For Use:The altitude not exceeding 1000m above sea level.The ambient temperature subject to seasonal variationsbut exceeding +40℃ and not less than -15℃。

Type	Power	Current	Rotation	Efficiency	Power factor
Y2-63M₁-2	0.18	0.53	2720	65	0.8
Y2-63M₂-2	0.25	0.69	2720	68	0.81
Y2-71M₁-2	0.37	0.99	2740	70	0.81
Y2-71M₂-2	0.55	1.4	2740	73	0.82
Y2-80M₁-2	0.75	1.8	2845	75	0.83
Y2-80M₂-2	1.1	2.6	2845	77	0.84
Y2-90S-2	1.5	3.4	2840	79	0.84
Y2-90L-2	2.2	4.9	2840	81	0.85
Y2-100L-2	3	6.3	2960	83	0.87
Y2-112M-2	4	8.1	2880	85	0.88
Y2-132S₁-2	5.5	11	2900	86	0.88
Y2-132S₂-2	7.5	14.9	2900	87	0.88
Y2-160M₁-2	11	21.3	2930	88	0.89
Y2-160M₂-2	15	28.8	2930	89	0.89
Y2-160L-2	18.5	34.7	2930	90	0.9
Y2-180M-2	22	41	2940	90	0.9
Y2-200L₁-2	30	55.5	2950	91.2	0.9
Y2-200L₂-2	37	67.9	2950	92	0.9
Y2-225M-2	45	82.3	2960	93	0.9
Y2-250M-2	55	100	2965	92.5	0.9
Y2-280S-2	75	135	2970	93	0.9
Y2-280M-2	90	160	2970	93.8	0.91
Y2-315S-2	110	195	2975	94	0.91
Y2-315M-2	132	233	2975	94.5	0.92
Y2-315L₁-2	160	279	2975	94.6	0.92
Y2-315L₂-2	200	348	2975	94.8	0.92
Y2-63M₁-4	0.12	0.44	1310	57	0.72
Y2-63M₂-4	0.18	0.62	1310	60	0.73
Y2-71M₁-4	0.25	0.79	1330	65	0.74
Y2-71M₂-4	0.37	1.12	1330	67	0.75
Y2-80M₁-4	0.55	1.6	1390	71	0.75
Y2-80M₂-4	0.75	2	1390	73	0.76
Y2-90S-4	1.1	2.9	1390	75	0.77
Y2-90L-4	1.5	3.7	1390	78	0.79
Y2-100L₁-4	2.2	5.2	1410	80	0.81
Y2-100L₂-4	3	6.8	1410	82	0.82
Y2-112M-4	4	8.8	1440	84	0.82
Y2-132S-4	5.5	11.8	1440	85	0.83
Y2-132M-4	7.5	15.6	1440	87	0.84
Y2-160M-4	11	22.3	1460	88	0.84
Y2-160L-4	15	30.1	1460	89	0.85
Y2-180M-4	18.5	36.1	1470	90.5	0.86
Y2-180L-4	22	42.7	1470	91	0.86
Y2-200L-4	30	57.6	1470	92	0.86
Y2-225S-4	37	69.9	1475	92.5	0.87
Y2-71M1-6	0.18	0.74	850	56	0.66
Y2-71M2-6	0.25	0.95	850	59	0.68
Y2-80M1-6	0.37	1.3	850	62	0.7
Y2-80M2-6	0.55	1.8	885	65	0.72
Y2-90S-6	0.75	2.3	910	69	0.72
Y2-90L-6	1.1	3.2	910	72	0.73
Y2-100L-6	1.5	3.9	920	76	0.75
Y2-112M-6	2.2	5.6	935	79	0.76
Y2-132S-6	3	7.4	960	81	0.76
Y2-132M1-6	4	9.8	960	82	0.76
Y2-132M2-6	5.5	12.9	965	84	0.77
Y2-160M-6	7.5	17.2	970	86	0.77
Y2-160L-6	11	24.2	970	87.5	0.78
Y2-180M-6	15	31.6	970	89	0.81
Y2-200L1-6	18.5	38.6	980	90	0.81
Y2-20L2-6	22	44.7	980	90	0.83
Y2-225M-6	30	59.3	980	91.5	0.84

4-72 Centrifugal ventilation fans

Thu, 30 Jun 2011 11:16:13 GMT

4-72 Centrifugal ventilation fans / centrifugal ventilator

4-72 Centrifugal Ventilation Fans can convey air and other unnatural but harmless to steel,non-corrosive gas.No adhesive matters are allowded in the air.The dust and hard granulated matters are less than 150mg/m3.The ambient temperature is less than 80 deg C.The fans have a good pneumatic performance.Their features are steady operation,less vibration,high efficiency,long life..There are totally 4 driving types:A,B,C and D type.

This kind of fans are widely used in mining industry,high building,hotels etc to ventilate and air exchange.

4-72A、D The main technical paramenters

(No)	Rotation (r/min)	Power (Kw-P)	Air-volume (m³/h)	Pressure (Pa)
2.8A	2900	1.5-2	1131-2356	994-606
3.2A	2900	2.2-2	1688-3517	1300-792
3.2A	1450	1.1-4	844-1758	324-198
3.6A	2900	3-2	2664-5268	1578-989
3.6A	1450	1.1-4	1332-2634	393-247
4A	2900	5.5-2	4012-7419	2014-1320
4A	1450	1.1-4	2006-3709	501-329
4.5A	2900	7.5-2	5712-10562	2554-1673
4.5A	1450	1.1-4	2856-5281	634-416
5A	2900	15-2	7728-15455	3187-2019
5A	1450	2.2-4	3864-7728	790-505
6A	1450	4-4	6677-13353	1139-724
6A	960	1.5-6	4420-8411	498-317
6D	1450	4-4	6677-13353	1139-724
6D	960	1.5-6	4420-8841	498-317
8D	1450	18.5-4	15826-29344	2032-1490
8D	960	5.5-6	10478-19428	887-651
10D	1450	55-4	40441-56605	3202-2532
10D	960	18.5-6	26775-37476	1395-1104
12D	960	45-6	46267-64759	2013-1593
12D	730	18.5-8	35182-49244	1160-919

4-72C The main technical paramenters

(No)	Rotation (r/min)	Power (Kw-P)	Air-volume (m³/h)	Pressure (Pa)
6	2240	15-4	10314-20628	2734-1733
	2000	11-4	9209-18418	2176-1380
	1800	7.5-4	8288-16576	1760-1116
	1600	5.5-4	7367-14734	1389-881
	1250	3-4	5756-11511	846-537
	1120	2.2-4	5157-10314	679-431
	900	1.5-4	4144-8288	438-278
	800	1.1-4	3684-7367	346-220
8	1800	30-2	19646-25240	3143-3032
	1600	37-2	28105-36427	2920-2302
		22-2	17463-22435	2478-2390
		30-2	24982-32380	2303-1816
	1250	11-4	13643-25297	1507-1106
	1120	7.5-4	12224-15705	1209-1166
	1120	11-4	17487-22666	1124-887
	1000	5.5-4	10914-14022	963-929
	1400	7.5-4	15614-20237	895-707

4-72C The main technical paramenters

(No)	Rotation (r/min)	Power (Kw-P)	Air-volume (m³/h)	Pressure (Pa)
2.8	2900	1.1-2	1131-2356	994-606
	2200	0.37-2	994-1522	556-443
	1800	0.25-2	812-1245	372-296
3.2	2900	1.5-2	1688-3517	1300-792
	2200	0.75-2	1483-2273	726-579
	1800	0.55-2	1213-1860	486-387
3.6	2900	3-2	2664-5268	1578-989
	2200	1.5-2	2310-3434	881-723
	1800	0.75-2	1890-2810	590-483
4	1900	5.5-2	4012-7419	2014-1320
	2300	2.2-2	3573-5491	1238-917
	2000	1.5-2	3107-4775	936-694
	1700	1.1-2	2641-4058	676-501
4.5	2900	7.5-2	5712-10562	2554-1673
	2300	4-2	5088-7819	1570-1163
	2000	3-2	4428-6799	1187-879
	1700	2.2-2	3671-5779	858-636
5	2900	15-2	7728-15445	3187-2019
	2300	7.5-2	7022-11363	1978-1468
	2000	5.5-2	6106-9881	1495-1110
	1700	3-2	5190-8399	1080-802

4-72C The main technical paramenters

(No)	Rotation (r/min)	Power (Kw-P)	Air-volume (m³/h)	Pressure (Pa)
8	900	4-4	9823-12620	779-752
	800	5.5-4	14052-18213	725-572
	710	3.0-4	7749-14368	485-450
10	1250	37-4	34863-48797	2373-1877
	1120	30-4	31237-43722	1902-1505
	1000	18.5-4	27890-39038	1514-1199
	900	15-4	25101-35134	1225-970
	800	11-4	22312-31230	967-766
	710	7.5-4	19802-27717	761-603
	630	5.5-4	17571-24594	599-475
	560	5.5-4	17571-24594	599-475
12	1120	75-4	53978-75552	2746-2172
	1000	45-4	48195-60397	2785-1969
	1000	55-4	63953-67457	2185-1969
	900	37-4	43375-60712	1859-1729
	800	22-4	38556-41973	1395-1376
	800	30-4	45391-53996	1321-1104
	710	18.5-4	34218-47895	1097-869
	630	15.4	30362-42498	863-684
	560	7.5-4	26989-29381	682-673
	560	11-4	31774-37776	646-540
	500	7.5-4	24907-33728	543-430

4-72C The main technical paramenters

(No)	Rotation (r/min)	Power (Kw-P)	Air-volume (m³/h)	Pressure (Pa)
8	900	4-4	9823-12620	779-752
	900	5.5-4	14052-18213	725-572
	800	3-4	8732-16190	615-452
	710	3.0-4	7749-14368	485-450
10	1250	37-4	34863-48797	2373-1877
	1120	30-4	31237-43722	1902-1505
	1000	18.5-4	27890-39038	1514-1199
	900	15-4	25101-35134	1225-970
	800	11-4	22312-31230	967-766
	710	7.5-4	19802-27717	761-603
	630	5.5-4	17571-24594	599-475
	560	4-4	15618-21861	473-375
12	1120	75-4	53978-75552	2746-2172
	1000	45-4	48195-60397	2185-1969
	1000	55-4	63953-67457	2185-1969
	900	37-4	43375-60712	1859-1729
	800	22-4	38556-41973	1395-1376
	800	30-4	45391-53996	1321-1104
	710	18.5-4	34218-47895	1097-869
	630	15-4	30362-42498	863-684
	560	7.5-4	26989-29381	682-673
	560	11-4	31774-37776	646-540
	500	7.5-4	24907-33728

strong force electric fan

Thu, 30 Jun 2011 11:14:41 GMT

Strong Force Electric Fans /Industrial

strong force eletric fan is appliable for the sun-stroke prevention,cooling purposes in the occasions such as factory workshop,warehouse,basement,cantee,etc.the service enviromental temperature of the fan does not exceed 40 degree.it can be used in the non-corrosive gas with no particle dust.

strong force electric fan is mainly composed of motor,swing mechanism,fly,screen cover,wall type support frame.the fly has been formed by aluminum.

die-casting with static balancing correction,smooth running and high efficiency .

DDT Low Noise Multi-wing Centrifugal Ventilator

Thu, 30 Jun 2011 11:14:15 GMT

DDT Low Noise Multi-wing Centrifugal Ventilator/ ventilation fan

DDT Low Noise Multi-wing Centrifugal Ventilator is designed to meet the developing demand of purifying,environment protection, and noise lowing.The fans adopts multi-purpose optimized design of noise,effieciency and other parameters,and have a good pneumatic performance.Impeller and belt pullery are all strictly dynamic balancing corrected.Therefore,it operated steadily with low noise,large air volume,less vibration and long life.

It is widely used for the kitchens in canteens,hotels,food store to ventilate and exhaust.It is useful and well-adaptable.

DDT 型主要参数/ The main technical paramenters

Type	No	Transmission	Speed (rpm)	Air-flow (m³/h)	Pressure (Pa)
Type	No	Transmission	Speed (rpm)	Air-flow (m³/h)	Pressure (Pa)	Motor (type)	Power (kw)	Voltage (V)
DDT9-63-12	2	A	2800	1900-2500	1200-959	YL8042	1.1	220
DDT9-63-12	2	A	2800	1900-2500	1200-959	YS8022	1.1	380
DDT9-63-12	2	A	1400	900-1100	300-350	C06334	0.25	220
DDT9-63-12	2	A	1400	900-1100	300-350	A08014	0.25	380
DDT9-56-12	2.5	A	1400	2000-2800	450-530	CO8014	0.75	220
DDT9-56-12	2.5	A	1400	2000-2800	450-530	A07114	0.75	380
DDT9-56-12	3	A	1400	3500-4000	500-600	Y90L-4	1.5	380
DDT9-56-12	3	A	1400	3500-4000	500-600	Y90L-4	1.5	220
DDT9-56-12	3	A	1400	2600-3900	480-580	Y90L-4	1.1	380
DDT9-56-12	3	A	1400	2600-3900	480-580	Y90L-4	1.1	220
DDT9-56-12	3.5	A	960	570-688	630-558	Y100L-6	1.5	380
DDT9-56-12	3.5	A	1420	5100-6000	700-800	Y100L2-4	3	380
DDT9-56-12	4.5	A	960	7000-9000	600-750	Y132S-6	3	380
DDT9-55-12	5.5	E	750	11000-12300	650-720	Y112M-4	4	380
DDT9-55-12	6.5	E	630	12000-16500	630-720	Y132S-4	5.5	380
DDT9-60-12	7.5	E	600	20000-28000	720-840	Y160M-4	11	380

9-19 High Pressure Centrifugal Ventilator

Thu, 30 Jun 2011 11:21:18 GMT

9-19 High Pressure Centrifugal Ventilator

9-19 A、D/The main Technical performance

Type	Power （KW-P）	Air-flow （m3/h)	Pressure （pa）
3.15A	0.75-2	390-180	1919-1953
3.55A	1.5-2	560-760	2545-2590
4A	2.2-2	824-1264	3584-3597
4A	3-2	1410-1704	3507-3253
4.5A	4-2	1174-2062	4603-4447
4.5A	5.5-2	2281-2504	4297-4112
5A	7.5-2	1610-3166	5697-5323
5A	11-2	3166-3488	5323-5080
5.6A	11-2	2262-3619	7182-7109
5.6A	18.5-2	3996-4901	6954-6400
6.3A	18.5-2	3220-5153	9149-9055
6.3A	30-2	5690-6978	8857-8148
7.1D	37-2	4610-7376	11717-11596
7.1D	55-2	8144-9988	11340-10426
8D	75-2	6594-11649	15032-14546
8D	110-2	12968-14287	14021-13362
8D	7.5-4	3297-4616	3620-3647
8D	15-4	5275-7144	3584-3231
9D	15-4	4695-7511	4597-4551
9D	22-4	8294-10717	4297-4101
10D	30-4	6440-12450	5941-5495
10D	37-4	13952-15455	5244-5958
11.2D	45-4	9047-15380	7364-7236
11.2D	75-4	17471-21713	6927-6246
11.2D	15-6	5990-10182	3182-2996
11.2D	22-6	11580-14375	2860-2705
12.5D	22-6	8327-14156	3975-3907
12.5D	37-6	16099-19985	3741-3377

9-26 A 、D/The main Technical Performance

Type	Power （KW-P）	Air-flow （m3/h)	Pressure （pa）
4A	5.5-2	2198-3215	3852-3407
4.5A	7.5-2	3130-3685	4910-4776
4.5A	11-2	3963-4279	4661-4256
5A	15-2	4293-6349	6035-5361
5A	18.5-2	4293-6762	6035-5180
5.6A	22-2	6032-7185	7610-7400
5.6A	30-2	7766-9500	7218-6527
6.3A	45-2	8588-11883	9698-8915
6.3A	55-2	12699-13525	8636-8310
7.1D	75-2	12292-14634	12427-12078
7.1D	110-2	15862-19360	11776-10635
8D	132-2	17584-20947	15955-15504
8D	200-2	22640-27696	15112-13634
8D	18.5-4	8792-12166	3834-3529
8D	30-4	13001-13848	3421-3294
9D	30-4	12518-14913	4869-4736
9D	45-4	16118-19717	4620-4181
10D	55-4	17172-21465	6056-5920
10D	75-4	23612-30052	5761-5065
11.2D	110-4	24126-36189	7747-7009
11.2D	132-4	39205-42221	6691-6382
11.2D	30-6	15973-21963	3346-3140
11.2D	37-6	23959-27935	3013-2763
12.5D	160-4	33540-41925	9713-9356
12.5D	250-4	46117-58695	9013-7993
12.5D	45-6	22206-27757	4179-4028
12.5D	75-6	30533-38860	3921-3450

CZR Centrifugal AC blower

Thu, 30 Jun 2011 11:13:50 GMT